Having a problem with a win 92. Figured I'd start a new thread since I have another thread going with a different issue and same rifle.
Winchester 1892 32-20, 24" octagon bbl, made 1904.
The bolt is stiff. You just about need to smack the lever open or closed about half way through the stroke. With the action completely dissembled except the cartridge guides the bolt hits a bind halfway across the guides by shoving the bolt forward or backwards. If I remove one guide or the other (as long as one is removed) the bolt is free moving. With both guides installed the problem is back. It does not matter if the magazine catch spring is installed or not.
Some things I have looked at,
Both guides are clean.
Both areas where they guides fit are clean with no gunk or debris.
Bolt is clean and smooth. Some pitting due to black powder loads or corrosive primers in yesteryear.
I have lubed all parts.
With the rifle completely assembled everything functions 100% but severely stiff. I messed with it last weekend and a couple more hours tonight. I have not gained any improvements at all.
When the bolt hits the tight spot on closing I can gently pry between the front of the cartridge guides and the bolt becomes free.
I also have a Rossi 92 in 44 mag and after slicking it up it cycles easily with your pinky finger.
Looking for advise here. I'm at a standstill so to speak.