So i went a did it a odd ball way.
Bench top is two 2x8. Side by side.
Then cut a 2x8 into a mounting board.
So press is monutaed to the board and i can swap it out with a different press with out making new holes.
Also 4inchs of wood held down with bolts.
I did this as the lee load master has the worst possible place for mounting holes less the a 1/4 inch from the lip of the bench. This way i used a hole saw and.cut out the ram guide and moved the bolts back.
Next is shelliving and a idea i have for shotgun hulls / wads.
Sent from my LGLS991 using Tapatalk