No.....You still use acetone or MEK. denatured Alchohol is only to slow down the flashoff. I tried it on its own and it took like 10 minutes of swirling and it still was not dry. arms got tired from swirling, so gave up and melted them down.
You need to remember that I am continually trying different things with this coating. It is all experimental til it has been tried and tested.
There are far more people using this in many different climates. people asked about slowing down the flash off time. So I talk to HITEK Joe and we throw ideas around. A lot of the things I try do not work, so into the melt down pot they go. At any one time, I have about 8000 135gn RN 9mm bullets sitting here to be used for testing. 250 at a time. 2 days ago, I melted down 2500 test failures. a new colour that failed to bake. a black that was brown. a black that was too thin. a blue that went black etc etc etc...
There is a lot happening that nobody knows about.
I have on hand at least a litre or more of every colour used by the commercial casters/coaters here in OZ.
Every batch that goes to the USA has samples sent by Joe for testing prior to dispatch to verify quality.
So if you lot have issues with the coating, it is your error......lol