A bunch of years ago I purchased a Winchester 94 John Wayne in 32-40 and stored it in the back of my gun safe. Recently I discovered that I was not going to live forever, and I might as well shoot the gun. So I purchased an RCBS 170 grain flat nosed gas checked mold for it and started looking for loads for deer hunting (short range woods hunting). And all the loads listed in my Lyman Cast Bullet Handbook (Third Edition) look like pistol loads. Their maximum speed for a 164 grain boolet is 1315 fps using 8.5 grains of Unique! I run faster and heavier cast boolet loads in my 44 magnum RedHawk! So, could any of you deer hunters experienced in cast boolet shooting suggest some loads that I might use in this modern Winchester 94 in 32-40 using a 170 grain gas checked boolet? I would appreciate it.