Encouraged and educated by Cranium and others on Sticky: PID on Lee Pro, after more than 50 years of casting, I decided to add a PID to my setup. I ordered the parts from http://www.auberins.com/index.php?ma...products_id=14 per the sticky, including their case. I almost sent the case back as I concluded no way will things fit. After some study I decided to go for it. Very shoe-horned it but it fits nicely. The 110 electrical connections is via a 14-3 cable to external wall outlet boxes. I decided not to add any buzzers since the PID itself shows all the alarm and status information I need and I can't hear the buzzer anyway. I have one remaining addition, a 1.75" sq heatsink which will attach to the rear of the cabinet, over the SSR. It will thermally couple through the back panel via heat sink compound. Hopefully that, together with the case itself and the rangehood will keep it cool enough. After the heat sink, I'll wire it into the smaller electrical box, build some kind of probe support, and I'm off and running.