anyone seen this?

[Taylor]

Attachment 126174

[Remiel]

neat little aftermarket primer catcher, I thing someone in S&S sells a similar rig,

[RobS]

Nope......not see that one yet.

[anotherred]

Yep, someone on here is making them with a 3D printer. Sorry for not being anymore helpfull

[Taylor]

I found it while searching google. Made contact via email,waiting for a reply.The address was rick@reloadingcreations.I will get me one of these things! The original idea,according to rick was from "Thingiverse".

[Roosters]

Another option that has worked for me being that I’m cheap.

I cut a short piece of a drinking straw like from Mc Donald's and slip it into the grove in the ram to funnel them into the original primer catcher . Cut the straw with scissors and play with the length till you get it right. Works pretty good and cheap.

[Lars-K]

Check: http://www.reloadingcreations.com/

[Lars-K]

Original 3D drawing can be found here: http://www.thingiverse.com/thing:84047/#files
So, if anybody has a 3D printer it's just to start producing...

[Hardcast416taylor]

Another option that has worked for me being that I’m cheap.

I cut a short piece of a drinking straw like from Mc Donald's and slip it into the grove in the ram to funnel them into the original primer catcher . Cut the straw with scissors and play with the length till you get it right. Works pretty good and cheap.

Been doing this same way for quite a few years on my Rock Chucker, works real nice.Robert

[gpidaho]

I use the foam weather stripping with the one sticky side between the plastic primer catcher and the Rockchucker frame. Holds the catcher tighter to the ram and works well for me. Learned that trick " RITE CHEAR" on Cast Boolits GP

[Taylor]

Check: http://www.reloadingcreations.com/

yep,that's the site

[fast ronnie]

I wonder if this would work on the original RC by turning the ram around backwards? Anybody tried that yet?

[LUBEDUDE]

Finally something that actually looks like that it was actually made for the RC that works!

[GoodOlBoy]

I don't understand how that is supposed to work. My RCBS press kicks the primers out the front of the ram. They would shoot out right in between those two little prongs.....

GoodOlBoy

[Sweetpea]

I don't understand how that is supposed to work. My RCBS press kicks the primers out the front of the ram. They would shoot out right in between those two little prongs.....

GoodOlBoy

This is for the Supreme, will not work on the older presses.

[GoodOlBoy]

ah ok.... makes sense. Thanks.

GoodOlBoy

[prsman23]

I've been wanting a 3-D printer. Group buy!

[Sweetpea]

BTW, I have the one from our own Jonny_V, and I wouldn't trade it...

[starmac]

I don't understand how that is supposed to work. My RCBS press kicks the primers out the front of the ram. They would shoot out right in between those two little prongs.....

GoodOlBoy

Glad you ask, I was looking at it thinking it sure is cute, but isn't going to do a fricken thing. lol

[Taylor]

starmac,I believe it will do something.1st-it will clean up the press.2nd-you won't dump primers trying pull off the tray to empty it.Just run the hose to a pill bottle.Personally,I like it and have ordered one.I broke the original anyway.