Anybody get it to work good? Tried to load for SIL's, cases sized & trimmed to spec. empty cases fit fine. Seated a boolit sized 3105, jams. Ran through a 309 sizer = 310. Ran through a 308 sizer = 310. Darn, gotta call Lee. Neck OD is 334-337, in SAMMI spec. (taper throat 390-380), FCD. PCd 165 bore rider. Can't get any marks on the boolit from pounding a dummy into the chamber. No indication from the felt marker trick either. Case won't go far enough to let the lifter clear. I assume a really tight throat in this one. Throat is clean. Loaded FTX in this rifle fine, it actually cloverleafs 3 shots @ 100 with Hornady ammo - no throat reaming allowed. Understand Remlin is not making this anymore so I'd like to get it to work with cast. Anyone else have similar problems and know a fix? One obvious idea is neck turning or reaming, not set up for either. Sizing to 308 may allow chambering but probably not shoot worth a darn.