Do you have better photos of how it works?
Sorry guys, apparently the sale link went bad.
I will try to get the video back up. We are almost out of 300 jigs but I do have
40/357 sig case cutters for bullet swagging 45acp
9mm case cutters for bullet swagging 40sw
7.62x25 tok out of 5.56
TCM22 out of 5.56
7.62x40 wt
Custom 308/3006 parent case jigs
Will the 300blk one work for cutting down 308 to make 300 Savage?
For the 300Sav from 308 I make I just trim them down. For what I do with those to trim them down would take me longer to do if I used a jig.
http://castboolits.gunloads.com/show...from-308-brass
Click to see what I'm doing and have available, this takes you to the VS (Vendor Sponsor) section of the site. Currently..25Rem,30Rem, 32Rem, 35Rem, 257Roberts, 358Win, 338Fed, 357 Herrett, 30 Herrett, 401 Winchester, 300Sav, 221 Fireball, 260Rem, 222Rem, 250 Savage, 8mm Mauser (AKA 8x57), 25-20WCF
Annealing Services
http://castboolits.gunloads.com/foru...php?117-Grumpa
I would never do that because it isn't accurate enough for me. The El-Cheapo *** chop saw moves to much for me to even give that a consideration. I use a 3-Way trimmer and it takes me longer to put the brass in the trimmer than it does for me to actually trim it....
Same thing for the 8mm conversions I do...
Click to see what I'm doing and have available, this takes you to the VS (Vendor Sponsor) section of the site. Currently..25Rem,30Rem, 32Rem, 35Rem, 257Roberts, 358Win, 338Fed, 357 Herrett, 30 Herrett, 401 Winchester, 300Sav, 221 Fireball, 260Rem, 222Rem, 250 Savage, 8mm Mauser (AKA 8x57), 25-20WCF
Annealing Services
http://castboolits.gunloads.com/foru...php?117-Grumpa
Like I said I was just wondering. I have 200 pieces of converted 300 Savage brass ready to load. I finished annealing them last night. I should be good w/ brass for quite a while.
For those that have asked I should have some jigs on 6-20-14 if ups runs right
money sent for blemished 300 blk jig
Got a jig to trim .40 cases. Works great. He says he has plenty. Thanks.
Hello,
Do you have one of your jigs for .308? I want to trim to 1.180 to make some 45acp shotshell cases.
Your in box is full.
Do you have any left? I want to purchase one if you do.
We are out of normal jigs but we have "ugly ducklings jigs" that have had a machining operation done after anodizing. The anodizing is perfect in the areas that get worn and they are 100% functionally equivalent to he normal jigs. These are $31 shipped paid via paypal to vonzep58@yahoo.com
308 jigs are in the works as are more normal 300 jigs, Should be up after the holidays
In box is clear but email is always best
how about a jig for 7.62x25 Tokarev brass from 223 brass
Frank G.
Just sent money for one of the Ugly Duckling jigs
Received the jig today. That's what I call service
And if I had a 20% off HF coupon in my wallet earlier I would be cutting brass instead of typing this
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |