MidSouth Shooters SupplyTitan ReloadingRepackboxWideners
Snyders JerkyRotoMetals2Load DataLee Precision
Inline Fabrication Reloading Everything
Results 1 to 9 of 9

Thread: Light loads for .35 Rem.

  1. #1
    Boolit Mold
    Join Date
    Mar 2005
    Posts
    23

    Light loads for .35 Rem.

    I need some recipes for light loads using .358 cast 158 gr swcs. My book shows about 10 grs. of Unique. Can I use 7 or 8 grns. and be safe. Fixing these for some small girls.

    Thanks,
    Vince

  2. #2
    In Remebrance


    Bret4207's Avatar
    Join Date
    Mar 2005
    Location
    St Lawrence Valley, NY
    Posts
    12,924
    Yup, you can, or you can use even lower loads with faster powders. I will TRY to remember to look up some of the old data when I get out to the barn today. (casting room)

  3. #3
    Banned



    Join Date
    Nov 2009
    Location
    Kansas
    Posts
    7,068
    I used to shoot mine with the Lyman 358311 and 8 grains on Red Dot, but I think a similar charge of Unique would work well too. Gotta love the .35 Remington, t sure is a sweetie to load for and shoot.

  4. #4
    Banned
    Join Date
    Jan 2006
    Location
    The Island of Misfit Toys
    Posts
    5,951
    With unique/red dot/bullseye/700X/green dot you can safely go as slow as you want .... as long as they ALL make it out the end of the barrel...that could be bad. I have went stupid super uuuber slow in the 30/30 and stuck one in the bore. That is no big deal as long as you realize it happened.

    My favorite no doubt "limbo load" for the 35rem is 6gr unique and a soft cast tumblelubed SWC.

  5. #5
    Boolit Grand Master


    Larry Gibson's Avatar
    Join Date
    Jul 2005
    Location
    Lake Havasu City, Arizona
    Posts
    21,375
    I've done a bit of testing with PB'd pistol bullets in my 35 Rem (M91 Argie rebarreled with Shilen 26") and have found accuracy really isn't all that great above 1160 fps with a couple bullets and most give best accuracy in the 800 - 1050 fps range. I found Bullseye to be the best powder for such loads. I cast them fairly soft and size all .358 - .360 depending on "drop" size and lube with a soft Lube such as javelina or LLA.

    My favorites loads are;

    Lee 356-120-TC over 5 gr BE for 1160 fps
    Lyman 358477 over 3.5 gr BE for 910 fps
    Speer or Honady swaged WCs or SWCs over 3 gr Bullseye for 830 fps

    Accuracy is excellent to 200 yards with the TC and SWCs, 75 yards or so with the WCs which also need to be single fed.

    Larry Gibson

  6. #6
    In Remebrance


    Bret4207's Avatar
    Join Date
    Mar 2005
    Location
    St Lawrence Valley, NY
    Posts
    12,924
    Vince, I thought I had some light loads stashed someplace, but I'll be hanged if I can find them. Probably put it all in a folder I hid someplace so I wouldn't lose it! Sorry.

  7. #7
    Boolit Buddy
    Join Date
    Mar 2005
    Location
    Soda Springs Idaho
    Posts
    223
    I have had good luck with tite group powder.

    Kirb

  8. #8
    Boolit Mold
    Join Date
    Mar 2005
    Posts
    23
    Thanks to all for your replies. I am going to try the 6 gr. of Unique and see if they will work. A friend has a couple of girls (8-10) and they like to shoot. Trying to make them some loads that won't make them gunshy. If anyone else has any loads, I will listen.

    Thanks again,
    Vince

  9. #9
    Boolit Grand Master Nobade's Avatar
    Join Date
    May 2005
    Location
    SE WV
    Posts
    6,305
    5 gr. Clays and any soft cast pistol bullets.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check