Has anyone heard of a 6.8SPC re-chambered to use a necked down 7-30 case?
You can get 6.8mm SPC barrels for the Condender.
Has anyone heard of a 6.8SPC re-chambered to use a necked down 7-30 case?
You can get 6.8mm SPC barrels for the Condender.
Last edited by ohland; 08-10-2011 at 07:15 PM. Reason: Clarity
The 6.8 SPC's parent case is the 30 Remington. The 30 Remington is a rimless 30-30 Winchester. That would, in effect, make the 6.8 a rimless .270-30 short.
You should be able to make a rimmed 6.8 SPC by using a 6.8 barrel and a .30-30 extractor and reload with a .30-30 shellholder.
You would also have to cut a relief in the chamber for the rim. It would be similar to Arthur Browns U.S. series of cartridges which was based on a 219DW. Very efficient line of cartridges, shot a 7mmUS for a little while until I got stoopid and sold the barrel.
Old enough to know better, young enough to do it anyway!
Men who don't understand women fall into two categories: bachelors and husbands!
sounds very much like a 30 herret to me I had one years ago and all it is is a cut down 30-30 shell and very efficient to in a Contender
My question is why? What would that do for you really?
Endowment Life Member NRA
Life Member NAHC
Journeyman WECSOG'er
Sounds more like a copy of a 270 Rocket, which is a 225 opened up to .270" One of the family of cartridges Jim Rock made for the Merrill(XL Pistol) 25 Rocket/270 Rocket/7 Rocket & 30 Merrill.
Jon
Col 2:13-17
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |