Ballisti-CastRotoMetals2MidSouth Shooters SupplyLee Precision
Graf & SonsStainLess Steel MediaInline FabricationTitan Reloading
Page 1 of 6 123456 LastLast
Results 1 to 20 of 113

Thread: CB Custom Ingot Moulds

  1. #1
    Vendor Sponsor 8/29/09


    Blammer's Avatar
    Join Date
    Feb 2007
    Location
    Asheville, NC
    Posts
    10,275

    CB Custom Ingot Moulds

    Here is the Custom Ingot mould Goup buy.

    Each ingot mould will Cost $25 each plus shipping.
    Shipping to you with insurance will be $10 for up to 2 ingot moulds.
    I will include a CB sticker!

    If you order more than 2 ingot moulds contact me for shipping price.

    A minimum of 50 pieces for the order is required.

    The GB will close on Aug 31, 2009, (8/31/09 Monday).

    There are three types of ingots available; a 4 bay and a 2 bay and 1 bay.

    This will be ran like the GB’s of old.

    You will need to go to the GB login section find the Ingot mould you want. Place the order, print 2 copies of the invoice and send payment to me, Blammer. You will need to add up the total cost of what you order as the software doesn’t do that yet.

    When the GB closes, I’ll place the order and send in the money.

    For those out of country please PM me for details on payment options and shipping costs.

    Here are the pics.










    Last edited by Blammer; 08-29-2009 at 09:47 PM.
    Sometimes you have to ignore the "good idea fairy"

    Please stop telling me "That can't be done" while I'm doing it, it's just plain annoying.

    HOW to order GC's and any other questions go here:
    http://www.blammersboard.com/

    vmthtr@charter.net is NOT my paypal addy

  2. #2
    Boolit Master


    Join Date
    Jun 2008
    Location
    East Troy, Wi.
    Posts
    424
    what are the weights of the ingots that they will drop?

    I wil do a four and a two holer.
    Last edited by timbuck; 07-27-2009 at 10:49 PM. Reason: decision

  3. #3
    Boolit Master

    Dennis Eugene's Avatar
    Join Date
    Mar 2007
    Location
    Craig, Prince of Wales Island, Alaska
    Posts
    1,144
    Once again DJ I do not have printer capabilities. So now what? Dennis

  4. #4
    Honcho, Boolit Master and Dean of Balls




    fatnhappy's Avatar
    Join Date
    Apr 2005
    Location
    Rochester, NY
    Posts
    3,308
    Quote Originally Posted by Dennis Eugene View Post
    Once again DJ I do not have printer capabilities. So now what? Dennis
    Dennis,
    take out yer purple crayon and rite et out by hand.

    Glad to help buddy.

    Dean

    Quote Originally Posted by Theodore Roosevelt
    No man is above the law and no man is below it: nor do we ask any man's permission when we ask him to obey it.

  5. #5
    Boolit Master

    Dennis Eugene's Avatar
    Join Date
    Mar 2007
    Location
    Craig, Prince of Wales Island, Alaska
    Posts
    1,144
    I just knew someone here would be able to help. This site is like no other on the web. Thanks all Dennis

  6. #6
    Vendor Sponsor 8/29/09


    Blammer's Avatar
    Join Date
    Feb 2007
    Location
    Asheville, NC
    Posts
    10,275
    Dennis, hand write it out and mail it in, no big deal here.




    OK for EVERYONE else:

    Little did I know that there would be so many who want more than 2.

    3 to 6 moulds $14 shipping. This will be for the medium flat rate box with insurance.
    Sometimes you have to ignore the "good idea fairy"

    Please stop telling me "That can't be done" while I'm doing it, it's just plain annoying.

    HOW to order GC's and any other questions go here:
    http://www.blammersboard.com/

    vmthtr@charter.net is NOT my paypal addy

  7. #7
    Boolit Master


    Wayne Smith's Avatar
    Join Date
    Mar 2005
    Location
    Hampton Roads, Virginia
    Posts
    6,879
    Blammer, check for two small on the way. Didn't make it to the other thread before you posted this one.
    Wayne the Shrink

    There is no 'right' that requires me to work for you or you to work for me!

  8. #8
    Boolit Master ddeaton's Avatar
    Join Date
    Feb 2008
    Location
    SW Ohio
    Posts
    878
    I got my order in. One dumb question though. How do you mark the ingot type with all of them cast on the surface? Marker, chisel mark?

  9. #9
    Cast Boolits Owner / CEO


    No_1's Avatar
    Join Date
    Mar 2005
    Location
    N.E. Florida
    Posts
    4,305
    I guess you could flatten out the ones that do not apply with a small hammer or you could "x" out the ones that do not apply.

    R.
    Robert

    NRA LIFE MEMBER

    Collector of Ruger #1's & #3's

  10. #10
    Vendor Sponsor



    Springfield's Avatar
    Join Date
    May 2005
    Location
    San Jose, California
    Posts
    3,245
    I plan on using a center punch and put a nice round dimple to the left of whichever mark happens to work. I plan on punching all the ingots, not the mould. I suppose if you were to use the moulds for one alloy ONLY you could put a nice punch mark on the mould, but I don't want to limit myself.
    http://www.whyteleatherworks.com/

  11. #11
    Boolit Master RANGER RICK's Avatar
    Join Date
    Mar 2005
    Location
    HOMER ALASKA,TYRANNOSAURUS THUMPER'S
    Posts
    389
    Order for 2 xlarge single cavities on the way .
    As they say "The check is in the mail "

    Thanks

    RR
    PRACTICE DOES NOT MAKE PERFECT !!! PERFECT PRACTICE MAKES PERFECT !!!!!!
    HOME OF THE 500 MAGNUM TYRANNOSAURUS THUMPER'S.........

    USS SARATOGA CV-60

  12. #12
    Boolit Master ddeaton's Avatar
    Join Date
    Feb 2008
    Location
    SW Ohio
    Posts
    878
    And I thought I had all the toys I needed for this hobby

  13. #13
    Boolit Man




    Join Date
    Apr 2005
    Location
    Mid Hudson Valley, NY
    Posts
    98
    Payment mailed out today from 12586, for 1 - Small, and 1 - Large.
    Thanks,
    -Harold

  14. #14
    Boolit Master in Heaven's Range 257 Shooter's Avatar
    Join Date
    Jul 2009
    Location
    New Braunfels, TX
    Posts
    350
    Payment mailed today from 78130 2-Small 1-Large

    Thanks for all the info,

    Jim

  15. #15
    Boolit Bub 2Sharp's Avatar
    Join Date
    Apr 2009
    Location
    Fulton, Missouri
    Posts
    42
    The check is in the mail for two large and two small.

    bj

  16. #16
    Boolit Master LeadThrower's Avatar
    Join Date
    Oct 2007
    Location
    CO
    Posts
    249
    my check is going out today for 2 4-cavities. Thanks for offering this GB!

  17. #17
    Vendor Sponsor 8/29/09


    Blammer's Avatar
    Join Date
    Feb 2007
    Location
    Asheville, NC
    Posts
    10,275
    PMT received

    23464
    12586
    78130
    94568

    8/1/2009
    65251
    99603

    8/3/2009
    80212
    77074

    8/4/2009
    P3L 1H4 (some place in Canada.... )

    8/7/2009
    28613
    84003
    85748

    8/8/2009
    27863

    Back in town now...

    8/14/2009
    3889 Australia
    13502
    13409
    83276

    8/17/2009
    S7J 2X9
    L1K 2M7
    91106

    8/18/2009
    72529

    8/19/2009
    25951
    Last edited by Blammer; 08-19-2009 at 06:04 PM.
    Sometimes you have to ignore the "good idea fairy"

    Please stop telling me "That can't be done" while I'm doing it, it's just plain annoying.

    HOW to order GC's and any other questions go here:
    http://www.blammersboard.com/

    vmthtr@charter.net is NOT my paypal addy

  18. #18
    Boolit Master Highland Drifter's Avatar
    Join Date
    Apr 2005
    Location
    Northern Utah
    Posts
    269
    Blammer,
    Payment went out today for two large and one small.

    Brian

  19. #19
    Boolit Master Chunky Monkey's Avatar
    Join Date
    Jul 2007
    Location
    Central, PA
    Posts
    255
    PM sent Blammer ~ I just ordered 2 small ingot molds. MO will go in the mail tomorrow.
    "A gun in the hands of a bad man is a very dangerous thing. A gun in the hands of a good person is no danger to anyone except the bad guys." ~ Charlton Heston, 1997

  20. #20
    Boolit Master


    Join Date
    Jul 2007
    Location
    Piedmont (Conover) NC
    Posts
    3,298
    I'll take 2 of the four cavity molds.
    Them is purdy.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check