I’m remodeling my cellar where I do my reloading etc. It tends to be more humid than I would like, so I have decided to install a dehumidifier. So far, 24 hours, it works great. The problem is the capacity of the holding tank is less than a gallon.
I don’t have a drain, so I plan to have the water empty into a larger container and then pump it out. I want this to be automatic, so I don’t have to think about it. The most economical way I’ve found is a bilge pump with an automatic switch in it. Unfortunately, they seem to only be available in 12 volts. I don’t want to go through the hassle of a 12V battery and a charger for it. Is there a simple transformer I can get? The current here is 230 volts. What do I need to be concerned about such as amps etc.
I could also get an aquarium pump, but will have to rig up an automatic switch for it, whereas the bilge pump is all one unit. I’m trying to keep costs down, that’s why I am not looking at a 230V sump pump that is really overkill. The bilge pump is only €22 with Amazon Prime.
Thanks for all ideas and advice.