Can anyone here do this and how much ? You can pm if you want to or just post.
Thanks, Rob.
Can anyone here do this and how much ? You can pm if you want to or just post.
Thanks, Rob.
Only opening it up 3 thou will be an easy to accomplish your self with a round dowel and some emery cloth .get a dowel about 10" long, Wrap the emery cloth around the dowel add a bit of light oil ,stick it through the sizer die so you can hold on to it on each side . Sit on a chair and roll the dieback and forth across the top of your leg with some downward pressure for a few minutes , go size a bullet and measure and proceed as needed
If you find yourself in a fair fight, your tactics suck!
K. Sounds easy enough.
Thanks, Rob.
I have done it by coating some bullets in valve grinding compound and pushing them through.
Just make sure you have some bullets coated with LLA to check your work after a few passes. Can't put metal back after removing it!
Founder of the Single Shot section.
A government big enough to give you everything you want is big enough to take everything you have.
8 in the 10 ring, then I get a PING. Love my Garand.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |