how fast can I push .310 NOE 311-199-SP-K5 bullet?

[bigjake]

Its a really pointy boolit. It is wheel weights mixed with some hard babbit. Powder coated with Smokes blue powder. its gas checked and has a coat of alox on the bottom of each bullet. they weigh about 204 gr, give or take a grain or two.
I want to shoot them in two rifles; rem 700 and a Windom AR 10
what is the max velocity I can push these in y'alls opinion?

thanks.

[Larry Gibson]

Assuming a .308W? If so you can "push" them to 2400 - 2500 fps. Whether or not you will get acceptable accuracy at that velocity level is debatable and remains to be seen, particularly with that bullet.

[bigjake]

Thanks for your reply Larry. Yes, it is 308 Win. Do have a better lead bullet in mind? I'm open for suggestions for sure.

[Grmps]

http://castboolits.gunloads.com/show...y-at-500-yards

[ChevelleDave]

I see that other thread is closed, is this comparable with the NOE 311-198-SP 2 cavity GC Brass (311365)? When I search that number, I get to the 311-199-SP-K5. Have they changed the description?

Anyhow, awesome results with that boolit. I hope to try this one day as well.

[LenH]

I have that bullet mold and have all but given up on it. I am shooting it out of a Remington 700 with a 1-12 twist. I have tried everything, RL-15, 4895 with filler, Unique, 2400.
I never could get any group under 3" at 100 yards. I may have been expecting too much but after experimenting with it for 2 years I have about given up. A guy at the range told me that it
was good enough to deer hunt with but I don't hunt.

I seem to remember a comment to the effect of `That sure is a long bullet for a 1-12 twist.' I bought it on a whim and NOE had a sale on that bullet mold.