Exactly my feelings. Let the YouTube guys like Johnny's Reloading Bench try 57 powder/primer/seating depth combinations for every bullet (in ARs no less) for months to gain .100" on a five shot group across a windless range.
I spent last night loading two ladder series with 70gr Sierra HPBTs using 4350 and H380 for .243. Might also run a third tonight with 760 under the same bullet. Not out of scientific interest but because those are powders I have a bunch of and are not currently being used up in any of my .308 or 30/06 loads. Find a good recipe for each and load 'em up. I plan on giving them as gifts to all my favorite coyotes in a couple of weeks.
Not doing much, but did pick up 72.5# lead at a gun show. $50. I was pretty happy with that price. Most was soft lead, some antimonial lead.
I looked at my RCBS Rock Chuck which I purchased in 1978 and is my first and favorite press and thought about all the pleasure it has brought me. It has stuck with me through all the good times and bad. Through two marriages it has always been my friend. Then I thought about the current state of our country and how these snot nosed no nothing socialist infused useful idiots are destroying the Constitution and cried.Reloading and casting have been my solace for 40 years.Shooting is just a technique I use to unload brass so I may cast and reload. I'm afraid of losing it all.It's all I want or have,it's my passion, except God and my third wife of course.I bought her a Rock Chuck and I hope God reloads/casts.I guess I'll put together some 45-70's with LEE 457-405-F I cast yesterday on the Rock Chuck.
"Adults are the children and the children are the adults" Jules my wife.
All you need for happiness is a good gun, a good horse, and a good wife. — Daniel Boone
Democracy is defended in 3 stages: Ballot Box, Jury Box, Cartridge Box. — Ambrose Bierce
A system of licensing and registration is the perfect device to deny gun ownership to the bourgeoisie. — Vladimir Ilyich Lenin
Black Rifles Matter
NRA Life Member, SAF Member, GOA Member, TFA Member
Cheeto303 I think most on this forum understand what you are saying and feel the same. We have to enjoy the good days while we can.
Today in the reloading room I made a blanking mess. Polish everyplace. That ruger mark 4 runs smooth as butter by hand tomorrow I will hit the range and give it a try. I can not tell you the trigger pull as my gauge is packed and I have no clue what box it is in. But it does feel to be around 3-3.5 pounds. Think it started at 7.
Keep your heads up guys we are not dead yet. Enjoy what we can while we still can.
"Adults are the children and the children are the adults" Jules my wife.
All you need for happiness is a good gun, a good horse, and a good wife. — Daniel Boone
Democracy is defended in 3 stages: Ballot Box, Jury Box, Cartridge Box. — Ambrose Bierce
A system of licensing and registration is the perfect device to deny gun ownership to the bourgeoisie. — Vladimir Ilyich Lenin
Black Rifles Matter
NRA Life Member, SAF Member, GOA Member, TFA Member
Smelted 80 lbs of pure lead from some old machine counter weights today. Still have another 212 lbs to go.
Sure like it better in small shiny ingots verses large oil soaked slabs.
SPJ
Made 1500 44 Mag for my Mod 29 on my Dillon.
Big Sandy Shooter
sorted 50 lbs of various mixed brass
Loaded more Buckshot loads in #4 and 00. More slugs, both Lyman 525 and the Russian Paradox. Loaded a couple hundred 9mm.
I love that room...
Kraken Fan #69
Dug out my 629-4 and decided I would like to scope it or put a red dot on it. I have no clue how to do that. Time to get reading. My reloading room is also my gun room.
I put the CH press to work on some .40's. I sized and primed all the cases first. Charging them off press.
Sent from my SM-J727V using Tapatalk
At one with the gun.
Powder coated 160 or so Lee 457-340f bullets and to sized .460 I had cast at least three years ago . Destined for my newly acquired 1886 Browning.
Attachment 216685
Last edited by Kevinakaq; 03-18-2018 at 11:54 PM.
“I won't be wronged. I won't be insulted. I won't be laid a hand on. I don't do these things to other people and I require the same from them." the duke
Rough Lader test. Will dial it in from these results.
Dems sum loooooong boolits!
Tom
μολὼν λαβέ
Did I ever mention that I hate to trim brass?
Today was the cleaning and rearranging day , yesterday and the day before was loading 300 blackout , and 458 socom rounds , as for cleaning that was because it is a cedar ceiling , and tigerwood trim that was finished today . Funny when going through stuff what one finds . all that stuff from years gone by . More 300 blackout to load , when powder comes in 458 socom that functions the ar , and of course time to load some more 45acp . But thats in one reloading room actually use another room for reloading also , and right now its pre heating new 45-70 molds for casting tomorrow.
Saturday I put another shelf in the room. It is starting to look "lived in" now. Cleaning all the junk off the floors and making it nice.
You can miss fast & you can miss a lot, but only hits count.
Son and I went to the range and tried out my cat-sneeze rounds plus some factory bullets. Boy those hand-loads were fun! They made a lovely little 1.5" group of 5 shots.
When we got home, I took all the brass and loaded up 20 more of these cat-sneeze "Olivers" - thus named for our lazy orange cat Oliver. Probably be a few weeks before we can go out and fire these off.
For the curious, I have but the simplest of reloading systems; a Lee Loader for 30-30, a pound of Titegroup, CCI primers and 165 gr hard cast, poly-coated boolits from Falcon bullets. While I wouldn't mind casting my own, for the moment I'll probably just keep being a patron of several small cast boolit businesses.
-KF
Last edited by Knightflyer; 03-19-2018 at 02:04 PM.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |