New screwdriver set

[crabo]

I have a Chapman set that I have had for 25 years. I bought some S&W from Grizzley tool and the same one broke twice. I would like a good set, or sets. I've had a pretty good ones over the years, but some of them I can't find.

Any suggestions?

[imashooter2]

The Brownell's screwdrivers are top quality...

http://www.brownells.com/.aspx/pid=4...REWDRIVER_SETS

[alamogunr]

The Brownell's screwdrivers are top quality...

http://www.brownells.com/.aspx/pid=4...REWDRIVER_SETS

+1 But I got the magna tip set:

http://tinyurl.com/6xg5t9v

John
W.TN

[R.C. Hatter]

Get the large magna-tip set from Brownells, you won't be dissapointed.
I've used them for years with no difficulty.

[buck1]

+4 on above. good stuff.

[dromia]

Brownell's set, first class.

[deltaenterprizes]

Stay away from the Caldwell set from Midway, very soft.

[unclebill]

Stay away from the Caldwell set from Midway, very soft.

i thought they were supposed to be soft so they could not damage screws?

or am i way off base?

[imashooter2]

i thought they were supposed to be soft so they could not damage screws?

or am i way off base?

They're soft because they're Chinese junk. Hardly an item exists that it can't be made a little bit cheaper and sold for a little bit less.

[dale2242]

I have a set of Chapmans I also have had for 25+ years and have no reason to even try another set....dale

[unclebill]

They're soft because they're Chinese junk. Hardly an item exists that it can't be made a little bit cheaper and sold for a little bit less.

i meant ANY gunsmithing drivers.

[pmeisel]

I got the Wheelers set because my Chapman's set was always in the house when I wanted it the shop or vice versa. Nice to have two.

[timkelley]

I have the biggest Midway set, I was going to be set for life. WRONG! Get the Brownell's set.

[waksupi]

I have a Brownell's set. When you order, go ahead and order some extra bits, as you will most likely end up regrinding some to fit specific screws. I see no need to buy the larger sets, as they contain bits that you will never use. My local hardware store sells bulk bits that are good steel for less money than gunsmith suppliers.

[Trey45]

I saw mention of Wheelers, there's a little mom and pop hardware store the next town over who has a 72 piece gunsmith set for $50, are they worth buying?

[montana_charlie]

i thought they were supposed to be soft so they could not damage screws?

or am i way off base?

You are off base.
As you apply heavy torque to a screw (such as a scope mounting screw) you need the driver to remain stable in it's fit to the slot. If it starts to give, it will mar the wall and wedge up out of the slot...ruining the screw.

A driver (or tip) tempered to the right hardness for gunsmithing will snap off cleanly if you over torque it...leaving the screw undamaged.

If you snap off tips on a regular basis, you are doing something wrong.
If you are ever able to 'bend' a tip, it doesn't have the right temper for gunsmithing.

I use Chapman drivers. Bought my set back when they still came in a leather-covered steel case, and had a jeweler's screwdriver included.

CM

[imashooter2]

I saw mention of Wheelers, there's a little mom and pop hardware store the next town over who has a 72 piece gunsmith set for $50, are they worth buying?

No. You can't buy quality screwdrivers for less than $1 a tip. More Chinese junk.

[unclebill]

You are off base.
As you apply heavy torque to a screw (such as a scope mounting screw) you need the driver to remain stable in it's fit to the slot. If it starts to give, it will mar the wall and wedge up out of the slot...ruining the screw.

A driver (or tip) tempered to the right hardness for gunsmithing will snap off cleanly if you over torque it...leaving the screw undamaged.

If you snap off tips on a regular basis, you are doing something wrong.
If you are ever able to 'bend' a tip, it doesn't have the right temper for gunsmithing.

I use Chapman drivers. Bought my set back when they still came in a leather-covered steel case, and had a jeweler's screwdriver included.

CM

thanks for the straight poop on this.

[PatMarlin]

The instructions in my Chapman set say something about them being soft and giving before messing up the screw head if memory serves me. Maybe where he got that from.

I've been wanting a large set since forever.

[unclebill]

The instructions in my Chapman set say something about them being soft and giving before messing up the screw head if memory serves me. Maybe where he got that from.

I've been wanting a large set since forever.

that is where i got that from.