Anyone know where I can get a crane retention screw for the model 85 Taurus SS. I've checked Numerich, Brownells, Midway etc. I will call Taurus customer service tomorrow, but haven't heard anything good about them yet.
Anyone know where I can get a crane retention screw for the model 85 Taurus SS. I've checked Numerich, Brownells, Midway etc. I will call Taurus customer service tomorrow, but haven't heard anything good about them yet.
Wow, I was going a whole different way with the title of this post
If Taurus can't help,try to figure what it looks like and I can make one. Metric threads and all. That's if it isn't a propriatary (read weird-goofy)thread.........
Lewis AKA Wright Brothers Gunsmiths
"Illegitimus non carborundum"
Political Correctness: A doctrine fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous media, which holds forth the proposition that it is entirely possible to pick up a t*rd by the clean end!
Boolits= as God laid it into the soil,,grand old Galena,the Silver Stream graciously hand poured into molds for our consumption.
Bullets= Machine made utilizing Full Length Gas Checks as to provide projectiles for the masses.
http://www.cafepress.com/castboolits
castboolits@gmail.com
In my current condition that could be a fatal trade, but what a way to go. Cactus farmer, if I can't find one I'll let you know. Be advised it's a small one. I will try some screws in the threads to determine the size, etc. Thanks. They're not letting me do much right now, so these puttering jobs suit me.
I'd bet it's a metric and a 2-3mm with a .5 pitch. Be careful with the trying old screws......threads get buggered up real easy,then it's a bear to figure out the size.
Lewis AKA Wright Brothers Gunsmiths
"Illegitimus non carborundum"
Political Correctness: A doctrine fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous media, which holds forth the proposition that it is entirely possible to pick up a t*rd by the clean end!
Don't forget the yoke screw contains a retaining pin and spring.
Just because change doesn't make a difference doesn't mean that change is bad.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |