i now have a bunch of .312 sized RCBS 130gr GC spire point and the Lee c312-155-2r wheelweight alloy sweetened with 2% 50/50 solder, Both have been oven heat treated @ 455 degrees in a convection oven for 1.5 hours and water quenched (approx 28 hardness) i sized ASAP with lanolin and seated my gas checks now i want to lube them, I want to shoot approx 2300fps with the 130gr and 1950-2050 fps with the 155gr in my SKS for service level loads, Now can i get by with alox/beeswax 50/50 ? or LLA ? or felix? or one of white labels lubes? I have a 4500 and no i am not sizing just lubing. and i will start with reduced loads with these bullets in my 308 win also, I talked to a hornady tech about subsituting .311 diam jacketed and he said they did some 308 win tests with a .311 dia bullets and it was on average 1 grain lower charge when used in place of 308 dia bullets.
guidiance is appreciated!!!!!
indy mad caster