I bought what was suppose to be a box of parts or an incomplete Lyman 45 sizer for spares for my old 45. The box arrived last night and as I started taking things out I couldn't find anything that looked right. After about and hour of cleaning and assembling I ended up with a complete Ideal #1 sizer,Pat. date 1892. Also in the bottom of the box was a set of Modern-Bond mould handles. The Ideal #1 is the original style with the faucet handle on the lube resevoir and it came with a set of .358 dies and top punch. Cleaned it looks tight and I am wondering if I should use it or just put it up. I think that with a soft lube it should be ok, I sure don't want to break anything on it, but my old #45 has been in use for 40+ years with minimal problems.