Not sure how many use these so a few pictures for your viewing pleasure. Pardon the dirty bench please. Some say the bullet feed is useless and would rather feed by hand allowing the bullets to fall into a box below.
Personally I like the feed for soft lube when stacking bullets in a box. I also use it for customer bullets as I catch the bullet falling from the die and roll it in my hand before it falls into the box. This allows viewing the entire bullet to be sure the lube groove is completely full..........Creeker
I use a long tube holding appox. 30 bullets. The slide return spring can't handle much more.
The tubes are standard plastic water line with a window cut to view bullets and a hole for the retainer pin. Note lower bullet is lubed. I like to feed a lubed bullet every 7th bullet depending on how much I'm reducing the size.
A better picture of the feed.
Slide feeding a bullet, poor picture.
Bullet in die ready to size & lube.
Dry Creek Bullet Works
Dry Creek Firewood