Just phoned IMR/Hodgdon people for suggested load data for Trail Boss Powder in .308 Win and 30-06 springfield cartridges. I was told they had not developed any suggested loads yet, so no help from them. I had noticed in the IMR 2006 powder pamphlet that you could use start load of 6.5 grains Trail Boss in 30-30 Win with 160 grain cast FN bullets. When I asked man at IMR/Hodgdon if I could adapt the 30-30 Win data and use 6 grains of Trail Boss in .308 Win, told Trail Boss is a whole new technology powder and does not act like other powders. So, for safety/liability reasons IMR/Hodgdon person could not help me.
So, I'm curious if anyone has tried Trail Boss powder in .308Win or 30-06 cartridges using 115 or 165 grain cast bullets. If so, what were your loads?