Savage stock

[Lead melter]

Can anyone recommend an aftermarket stock for a Savage M11 that would fit the Adams&Bennet magnum contour barrel I have?
The diameter of the new barrel is 1.040" at the barrel thread area. I would prefer not to "wallow out" the original stock to fit the new barrel. Laminant would be my material of choice, but composite runs a close second.
Maybe some of you folks who have done this type conversion can shed a little light on the subject?

[deltaenterprizes]

Try the Fajen stocks.

[largom]

Try Boyds Gun Stocks. You will still have to open the barrel channel though. They make some real nice laminate stocks.

Larry

[Bullshop Junior]

Mod 11 in the same as a 10, or a 110 short action, or a Stevens 200 short action. The Bell & Carson should fit the bill, and they are VERY nice stocks

[GabbyM]

http://www.stockysstocks.com/servlet/StoreFront

http://rifle-stocks.com/

thier's a couple places to shop. Remember Savage changed over to single stack magazines so the stocks are different for the two types.

[Bullshop Junior]

http://www.stockysstocks.com/servlet/StoreFront

http://rifle-stocks.com/

thier's a couple places to shop. Remember Savage changed over to single stack magazines so the stocks are different for the two types.

No, they are not.

[Mallard57]

You might try http://www.stockadegunstocks.com.
I got a stock from them some years back and I'm pretty happy with it.
Jeff