Kendwell, Hullo and welcome, try Posting a thread in Swappin & Selling , you may find help there.
Kendwell, Hullo and welcome, try Posting a thread in Swappin & Selling , you may find help there.
Slow Elk 45/70
Praise the Lord & Pass the Ammo
Haven't forgot this endeavor.
Been occupied getting a mould maker on line.
Will get back to this ASAP.
Thanks to all that have
sent sample bullets in.
Swede Nelson
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
I'd like to see them bring back the 311440 in 4C.
It's all chicken, even the beak!
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
This one may be a lil too obsolete, but I bid $350 on an original and still didnt get it!
LYMAN - 386178 41 LONG COLT HOLLOW BASE
How many still shoot the 348Win? I can never seem to find a Lyman 350457 or 350482 that I can afford.
The 311365 Ideal mold gives a ~200 gr bullet with highest ballistic coefficient in .30 caliber. From all I can gether from the web forums it is also one of the most accurate,
Right now as I am writing this, there is a bidding war on Ebay for a dual cavity Ideal 311365 mold going on to $255. I certainly love to see NOE do a run of 311365 molds.
Last edited by techlava; 12-01-2009 at 02:29 AM.
I would love to see a 31133 & 3118 rerun. I have both of these in sc. with the 31133 in hp. it took several years of searching, but I have them now. both are super in the 30 carbine and 7.62x25. and have used them in several 32 cal pistols and reduced 30-30 for small game.
Swede since this post came up again here are my suggestions:
Lyman 358627- 215 grain SWC GC with two crimp grooves, these go for crazy prices when they are available.
Lyman 299153-299155 heel based bullets of 80-90 grains for the poor saps like me that have 32 short or 32 long Colt guns that are in too good shape to ream for the 32 S&W cartridges.
Robert
FYI,
BRP Custom already offers the Lyman 358627; so there is no need to wait for a Group Buy. You can check out Bruce's lineup in the Vendor Sponsor forum. I have a half dozen of his molds (with many more to come) and can tell you that they are a dream to work with.
Hope this helps,
-Matt
Group Buys Honcho'd: C326-175-FN, 434-210-RF, C434-210-RF, 30-165-SIL-MOD, 358156-PB, 413-170-Keith, C348-225-FN, 8mm SIL, 45-230-CM, 45-270-Ohaus/SWC, Edd's 28-170-FN
I already have a Lyman 358627 from fleabay before molds went nuts on prices; I think mine cost $56.00 to my door. I knew that there had been a group buy on the 358627, but couldn't remember who made the molds. I was suggesting this for the guys that missed the group buy.
Thanks,
Robert
For the 25 Cal Shooters
25-100 Herters
257418
55A Cramer
257306
257325.
In God WE Trust!
NRA Life Member
"I'll keep my guns, my money and my freedom, you can keep the change!"
A remake of the Modern Bond .454 270gr waducutter profile bullet.
I think this mould would be a quick seller.
Lyman 358430 200 gr RN
Been looking for one, all I find is the 155 gr versions.
I aim to misbehave.
Mostly Harmless.
Lyman #321297, Lyman #350447, Lyman ##350482 (same profile but 250 gr. weight) Lyman #429251
Best mold for mid range 38 cast.
Stephen Perry
Angeles BR
I would cast my votes for the Ideal/Lyman 257463 75 gr. and 257464 90 gr. molds as well.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |