Starting to experiment .
For an AR , hopefully , if not , then in a bolt gun .
50 grain FP GC .
I know this is probably not going to be as straight forward as .30 caliber and bigger .
Constructive suggestions solicited .
God bless
Wyr
Starting to experiment .
For an AR , hopefully , if not , then in a bolt gun .
50 grain FP GC .
I know this is probably not going to be as straight forward as .30 caliber and bigger .
Constructive suggestions solicited .
God bless
Wyr
I use a RCBS 55 grain with 8.0 grains of Unique--2,100 FPS in my Rem 700---I have not used any cast bullets in a a semi-auto rifle...this caliber is very sensitive to the wind, but on a good day, very accurate.
The 223 does not lend itself well to the cast boolit. Hence the 22 LR swaged 224. You might find the swagers willing to trade you swagged 224 for cast boolits.
Last edited by sheepdog; 11-30-2009 at 04:15 PM.
Sheepdog makes a good point as I also use a .22-250 with cast bullets..using the same bullet (55 grain RCBS-GC) the .22-250 is far more accurate, however the .22-250 sports a varmint bull barrel... I do happen to think that the .223 with cast bullets is accurate enough for me out to medium ranges...to me it is just a souped up .22 Magnum RF...
I am sorry, I don't know....for lube I use a homemade lube of 50% church candles & 50% lithium grease. I used to use the NRA 50/50 Alox/beeswax--mine works just as well.
I purchased a RRA AR15 with heavy varmit barrel in 1:12 twist just for cast boolits and it shoots pretty good with RCBS 22-055 fp @ .225, felix lube and AA2015 @17.5 gr. Don't
know the speed but it cycles the action good throwing cases about 3 feet.
Don't let anyone tell you it can't be done. There many shooters on this board that shoot cast in there AR, It's easer than you think.
Calamity Jake
NRA Life Member
SASS 15704
Shoot straight, keepem in the ten ring.
We never said can't. Maybe shouldn't but not can't. You can shot cast out of Glocks just fine but is it worth the effort of cleaning after every box? Honestly buying a special firearm that just geared towards cast doesn't sound practical to me.
If you don't see a caliber under Lee's available moulds its probably because there isn't a market, need, or practicality for it.
Gosh, where do you get all this misinformation? Lee probably doesn't make 22 caliber molds because it's harder to cut the cherries accuracy and cut the cavities in the mould. It's not because there's no demand for them.
Whoever told you that you have to clean your Glock after every box told you wrong.
Because of all this misinformation you have gotten you're missing out on lots of fun.
Joe
I've been having good luck with these little honeys lately.
“an armed society is a polite society.”
Robert A. Heinlein
"Idque apud imperitos humanitas vocabatur, cum pars servitutis esset."
Publius Tacitus
No way you can post a picture like that(they look awesome!) and not give the goods. Old Lyman 224450 hp'd?
18gr of H-4895 and a 55gr cast (With GC and bullshop SG) shot REALLY good in my Remington 788.
I'll be watching this one with eagle eyes.
I'm thinking of replacing my 22LR and find casting fun. I was thinking of a 22/250AI or 22BR with trail boss for cast and then loading them up with jacketed bullets for varminting at longer ranges.
I shoot cast out of my G26 with the original barrel and have never had any problems. I do clean after shooting but do this with all of my guns that shoot cast. I clean because I want to not because I have to so I would have to agree with you. Although I know there is going to be somebody that 's going to tell me how my Glock is gonna blow up on me someday.
I use the 55gr LEE Bator Mold in my 223 Rem chambered AR15. This weekend, I found I had to seat the boolit deeper than my standard 55gr spitzer due to that nice rounded meplat on the boolit was engaging the rifling and not letting the bolt seat properly. Nice accuracy out to 100 yards so far. no recoil to speak of at 9gr of Unique and ejects the case cleanly. More information when I can get to the range again.
Bruce
I Cast my Boolits, Therefore I am Happy.
Bona Fide member of the Jeff Brown Hunt Club
My AR15 has a 1/9 twist also. I probably won't be able to get out there for another few weeks. I'll follow up when I've got a chance to shoot it again.
Bruce
I Cast my Boolits, Therefore I am Happy.
Bona Fide member of the Jeff Brown Hunt Club
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |