I have a good source of wheel weights, 1 six pack =300lbs wheel weights. Increasing percentage of zinc wheel weights. What do you do with these culls?
I have a good source of wheel weights, 1 six pack =300lbs wheel weights. Increasing percentage of zinc wheel weights. What do you do with these culls?
I sort the zinc and iron weights, the steel clips from melting the lead weights, and the tire valves and other junk from the weight buckets, these go in a barrel. I also put in spray cans, car parts, appliance parts, whatever small junk I have laying around. I just took the barrel to the junkyard and sold it for scrap sheetmetal. Weighed 400# of junk. Got $24. Since I was going to the junkyard anyway it paid for gas. Since I have to pay for trash hauling it's better to sell than pay.
Due to market fluctuations I am no longer buying range scrap jackets.
Sic gorgiamus allos subjectatos nunc
Zinc = fishing sinkers. Lead free fishing equipment is becoming required in many areas, especially public land, ie. federal and state owned areas, and zinc is a home castable substitute for the lead sinkers and jig heads etc... Find someone who cast their own fisning stuff and they will be glad to get it. I volunteer to take your zinc. PM if you have some, 10 ga
talk to the guys who shoot canons
they use zinc for canon balls
The fear of the Lord is the beginning of knowledge: but fools despise wisdom and instruction.
Proverbs 1:7
WACO, Hadn't thought of that but yes, cannonballs. There are a bunch of people here in the east that are into the reenacting stuff. Different groups for different eras but seems they all have some kind of cannon or swivel gun. 10 ga
I sold some to fishing weight makers but I am keeping it now. I made some swan shot out of it and it's better than gravel.
I guessing that it will become more used in bullets in the next few years. Who knows. It melts and shoots so I'm saving it.
I just picked up some WW lead today from a local tire dealer and he told me that in 2010 they will no longer use lead for WW's because of the EPA.
Mike
Qui tacet consentire videtur
Retired Navy (1966-2004)
NRA Life member (1994)
CRPA member
SBR&GC member
would zinc cast a good Cannon ball for a down rigger? If so, does anyone sell a mold?
I have accumulated a bunch of zinc by sorting it out of WWs. I was trying to think how it could be a resource instead of junk. I think I will get a duck decoy anchor mold and pour anchors !
"A society that values equality above liberty will have neither. A society that values liberty above equality will have plenty of both " - Milton Friedman
Frozone,
That already happened, and it involved the entire state. It took place in 1986 when President Reagan granted amnesty to un-told of illegal immigrants. Today, California is a Third World state governed by an ultra-liberal Sacramento that is controlled by even more liberal and whacko special interest groups.
Be informed, vigilant and alert, and vote, because what happens in California doesn't stay in California.
Don't forget about your homemade Zinc Phophates for Parkerizing.
Clean and degrease the WW and in theory, I bet it would work better than new pennies.
Make them into disks and sacrafishal anode ingots for Boats
Fishing sinkers are a great idea. Make me some 1/4 & 1/2 ounce ones!
Here is alother great idea to make a smelter!
Use an old Propane tank.
would be great in the ice shanty/ hunting shack also!
![]()
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |