Does anyone here use soft gas checks? They aren't too practical here because of the climate but I was thinking I could use them at least 8 months out of the year. Some people sware by them!
Does anyone here use soft gas checks? They aren't too practical here because of the climate but I was thinking I could use them at least 8 months out of the year. Some people sware by them!
mooman76;
there are Wax gas cks and fiber (cork?) gas checks and maybe others. Which?
Pepe Ray
The way is ONLY through HIM.
SoftChek is a brand name for wax sheets to be pressed over the case mouth before seating a cast bullet. They do give a marginal improvement , ime. They will also kill your loads deader than Lincoln if exposed to any degree of heat. I still have the remains of a box I bought 20 years ago.
Sometimes you gotta wonder if democracy is such a good idea.
I was talking about the wax ones but I did not know there was a fiber on! I really can't shoot the wax ones here because I live in the desert!
mooman76:
Try Pre-cut vegetable fiber wads.
John Walters
500 N. Avery Drive, Moore, OK. 73160
405-799-0376
Thetinwadman@cox.net
Good luck, Pepe Ray
The way is ONLY through HIM.
mooman
About 25 years ago I did a test for lube migrating.I was testing LBT lube than. I took
4 test tubes put some powder,Kaypok,and a lube wad and cork,also took 4 30-30 and spent primer,powder,and lube bullet. Put them in the tool box in the back of my truck
for the summer. The lube did not migrate.I am going to do the same thing this summer with Felix lube. The ambient temperature should be about the same at your area as mine.
Be carefull Dye
In years past I have used a lot of soft checks made from Beeswax and paraffin with a shot of Liquid alox.Originally Posted by mooman76
Today if I had to use a wad or soft check it would be either cut from LDPE or HDPE, in my experience it will do anything the wax will with smokeless powder and is a lot easier to handle.
Good luck
I used them 15-20 yrs ago when I had excessive leading in 9mm lugar ammo shot in an ancient P-38. They worked well, but were a pain to handle. I found that going to a cooler powder (-->Herco from Bullseye) worked just as well.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |