Willy Snyder
PO Box 2732
Pocatello, ID 83206
I would like to find a Manual Bullet casting machine simular to a Magma Master Caster that would allow for 4 cavity molds. I already own over 20 MP 4 cavity brass molds, I hate the idea of going back and buying 2 cavity molds for such a machine.
I would prefer to buy an existing machine but would consider the buld plans also. Since MP Molds are made in Europe I would consider a machine made in Europe.
The closest thing to what you're describing used to be made by Polykilips, in Italy, and is now out of production. But it used a 6-bullet mold. Although I suppose you could retrofit one to use 4-bullet molds.
https://www.youtube.com/watch?v=MXZaNxdqfUM
When democracy becomes tyranny, those of us with rifles still get to vote.
The molds are different. It would require major modifications to work with a standard 4c mold
Don't like being hammered by the Cast Boolits Staff, then don't be a nail.
The rules are simple to follow.
I too have a Master Caster. Have an assortment of moulds. Looking at the two cavity moulds; they are notched or machined between the top pour holes so the lead flows into both cavities. To fit up a 4-cavity mould the top fill holes would have to be cut with a ball cutter so the lead will flow and fill all four cavities. I think it could be done.
Have you tried a mold guide on your furnace? I have quite a few 4 cavity MP hp molds, and yes they are heavy suckers.
mold guide share.jpg
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote
HATCH
