HATCH
So I am trying something different that will reduce the cost of a panel by close to $200
Stay tuned for more info as I start on this.
It will still have a touch screen and a PLC but I am trying a combined unit. Display and PLC.
|
   
|
|
Willy Snyder
PO Box 2732
Pocatello, ID 83206
So I am trying something different that will reduce the cost of a panel by close to $200
Stay tuned for more info as I start on this.
It will still have a touch screen and a PLC but I am trying a combined unit. Display and PLC.
Don't like being hammered by the Cast Boolits Staff, then don't be a nail.
The rules are simple to follow.
Update for those who might be following
I will be building a test panel but so far the program itself looks great.
I have some tweaks.
It is a basic setup.
No fan control, no counter stop.
Those features might be added on later in testing but right now its in the program but not in the touchscreen side so no way to control.
Every MC panel that I have done in v7.4 has had all the options program into the PLC.
They just aren’t wired up and the touchscreen isn’t programmed to control those functions.
Don't like being hammered by the Cast Boolits Staff, then don't be a nail.
The rules are simple to follow.
Here is a tease
Don't like being hammered by the Cast Boolits Staff, then don't be a nail.
The rules are simple to follow.
not sure who is following this thread.
I am about ready to bench test the panel.
I have to install a relay which will prob be tomorrow night once I find out where my wife put my amazon order.
Don't like being hammered by the Cast Boolits Staff, then don't be a nail.
The rules are simple to follow.
Well how did it work?
I started out with nothing and I still have most of it left.
Paralyzed Veterans of America
Looking for a Hensly &Gibbs #258 any thing from a two cavity to a 10cavityI found a new one from a member here
The bench test checks out 100%.
The next step is to hook it up to a live machine and run it to figure out if I the enough range in the timers.
Don't like being hammered by the Cast Boolits Staff, then don't be a nail.
The rules are simple to follow.
still watching
I started out with nothing and I still have most of it left.
Paralyzed Veterans of America
Looking for a Hensly &Gibbs #258 any thing from a two cavity to a 10cavity
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote
