I decided to try another project. I'd like to work up a subsonic load for the ar using 200gr lee cast. To run suppressed. I'm hoping someone has a suggestion on powders I can try to accomplish this with.
|
   
  
|
|
I decided to try another project. I'd like to work up a subsonic load for the ar using 200gr lee cast. To run suppressed. I'm hoping someone has a suggestion on powders I can try to accomplish this with.
Swaging. Keeping the 40's running for the price of .22's
and .223 bullets for a fraction of a cent!
Bolt action or semi?
It may be tough to have enough gas to cycle semi with a 200gr bullet.
I do have info for a subsonic 250gr that cycles.
Bolt action or semi?
It may be tough to have enough gas to cycle semi with a 200gr bullet.
I do have info for a subsonic 250gr that cycles.
You’ll likely need slower burning powders than normal to have enough pressure at the gas port to cycle a 200 grain subsonic.
“Turn up the heat, and cast cheap!”
Barry54
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote