MidSouth Shooters SupplyMCD ProductsInline FabricationLee Precision
Reloading EverythingTitan ReloadingRotoMetals2

Page 3 of 3 FirstFirst 123
Results 41 to 45 of 45

Thread: American Reloading MP Powder and Load Data List

  1. #41
    Boolit Master


    Join Date
    May 2010
    Posts
    2,208
    Quote Originally Posted by Havok7416 View Post
    The new chart they published is super helpful, but it assumes they get consistent lots of powder. There is a dash number that goes after the main number for the powder; I can only assume each dash number represents a specific supplier or batch of powder.
    I’m thinking it’s more of a lot variation. I know it’s not a big deal to most shooting but the accuracy guys or USPSA that need to meet a power factor will pay attention when they get a new lot. It can be faster or slower.

    My guess is that’s all this is. Don’t assume 155-1 is the same as 155-2.
    Most manuals will tell you to go back to starting loads and work up when working with a new lot of powder. Same here.

  2. #42
    Boolit Mold
    Join Date
    Aug 2025
    Posts
    7
    Lot/batch. Whichever term one prefers.

    I've had some mild interest in these powders, but I have had some other priorities so I haven't had an opportunity to experiment yet.

  3. #43
    Boolit Mold
    Join Date
    Nov 2024
    Posts
    1
    I don't understand why they didn't include all the powders they've sold. For instance, I have 650, 662, and 663 and they're not listed. Why wouldn't they put out a complete list of their powders?

  4. #44
    Boolit Master Delkal's Avatar
    Join Date
    May 2010
    Location
    SE Pa
    Posts
    1,048
    Quote Originally Posted by Slm9s View Post
    I don't understand why they didn't include all the powders they've sold. For instance, I have 650, 662, and 663 and they're not listed. Why wouldn't they put out a complete list of their powders?
    All of the MP powders are numbered by deceasing burn rate so just find the closest number and it will be close (especially for their slow powders). I would pick the faster powder data to start but you always have to slowly work up. I consider a chronograph is required for any of them and especially if you use another cartridge not listed. i have many of their powders and they work as advertised but they are not for beginning reloaders.

  5. #45
    Boolit Master


    Join Date
    Jun 2009
    Location
    North central Ohio/Roane County, W.Va.
    Posts
    1,579
    Delkal has just given you excellent advise. If you don't have a chronograph, get one. If your new to reloading or uncertain, best to avoid powders such as these and rely on published data for canister powders. When dealing with surplus or pull down powders, it's important to remember, similar to is not same as.
    “Let us endeavor so to live that when we come to die even the undertaker will be sorry.”
    ― Mark Twain
    W8SOB

Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check