What Are You Doing Today? Post A Pic (if you can)

[steve urquell]

Now for cleanup. Was good day.

Looks like fun. Thanks for posting.

[36g]

Did some Duracoating on a build. Just about finished on a MPi-AKS-74NK. It test fired just fine so it's a matter of letting the Duracoat cure more then reassembly.

[Pereira]

Trying to rub the paint off of this thing.
One little ping at a time.



RP

[steve urquell]

Did some Duracoating on a build. Just about finished on a MPi-AKS-74NK. It test fired just fine so it's a matter of letting the Duracoat cure more then reassembly.

I'd llike to see how the duracoat looks if you have pics.

Trying to rub the paint off of this thing.
One little ping at a time.



RP

I love plinking steel. Fun stuff.


I just blasted a huge armadillo in the field. Probably 20lbs. First one with the .410 with 3-ball 000 buckshot in .444 Marlin cases. I nearly botched it. He was in the open and I put the laser on him, pulled the trigger "click" fumbled with the hammer block safety and 2 more clicks. He got under a big blue spruce near his burrow and I finally got the safety off--BOOM!, direct hit. As per the norm he flopped around and then right down the burrow!

I wanted to see what the 000 buck did on them but no such luck due to my comedy of errors.

[deltaenterprizes]

I cooked some eggplant lasagna because my wife is diabetic and the pasta is a problem for her.
That is dinner for tomorrow and the other half is going in the freezer for another meal in the future!
Moved a scaffold in place for a long overdue home brew “gutter guard” before the leaves start falling!
Ground off the name that a guy had engraved on a S&W 29 that I am restoring, shortened the rear sight screw and checked the sight adjustment with a laser.
Then I shortened the rear sight screw on a S&W Model 28 and checked the sights with a laser!
Busy day!

[SSGOldfart]

You better get started on that gutter guard these leaves or coming faster than normal this year

I just wacked a few bushes aka weeds and started repairs on my wheelchair trailer so not much to report today

[steve urquell]

Fabbing a target stand for 50yds. It will be like my others with a cardboard backer covered by a trash bag. Duct tape target dots and white duct tape patches it. Waterproof and easily replaced backer when it gets shot out.

[JonB_in_Glencoe]

cooking a Pizza on a weber charcoal grill

[steve urquell]

cooking a Pizza on a weber charcoal grill

Yum.

I got my stand done. All joints that were just the rebar joining rebar got a gusset to extend the joint 1" on either side of it. Wrapped the top corners with angle iron. Painted flat olive I had on the shelf. Gotta make the backer now.

[Pereira]

Looks nice, there Steve.
I just finished mowing grass, and it's time for a cols adult beverage...

RP