.327 magnum loads

[jmpollard]

I have a lot of .327 brass, I purchased an RCBS 32-098 swc mold and I’m having trouble finding load data for it. I have the Lyman cast handbook but doesn’t specifically list this bullet. HAs anyone used this bullet for general use and have any ideas about load data, Thanks

[Soundguy]

can you find data for something similar in weight and driving band profile?.. should be a safe starting point. the stuff forward past the ogive matters less

You can also use 32hr data in a 327 case same way you use 38 data in 357 cases

[jmpollard]

Thanks soundguy. Saeco makes a similar weight and keith style but the rcbs is longer. I will start with that but was looking for something specific based on how popular this bullet is.

[Minerat]

I've loaded 327 mag cases with that bullet using, 4.5gr of Red Dot or 5.0 gr of WW231. Never chronoed it but fairly mild loads.

[P Flados]

You give a bullet, but did not really give enough info for us to give you recommendations that would be most helpful.

I have Quickload and like to help others with runs that may be useful. Good inputs are needed be most helpful. These include:

Powder(s) of interest
Barrel length (breech to muzzle)
Bullet weight
Bullet length
COAL
Desired power level, pressure or something similar

[P Flados]

deleted duplicate