Reloading EverythingTitan ReloadingLee PrecisionRotoMetals2

Donate Now Goal amount for this year: 4000 USD, Received: 1570 USD (39%)
Our Annual server fund drive is going on now! This donation drive helps fund Cast Boolits for an entire year, and helps support our 2nd amendment rights! You can donate by Paypal by clicking the DONATE button. Or by Cash / Check / MO to the address below:

Willy Snyder
PO Box 2732
Pocatello, ID 83206


Page 2 of 2 FirstFirst 12
Results 21 to 27 of 27

Thread: Liquid Car Wax

  1. #21
    Boolit Master ACC's Avatar
    Join Date
    Nov 2019
    Location
    San Antonio Texas
    Posts
    1,187
    Quote Originally Posted by Delkal View Post
    What bad things have you heard? Adding Johnson paste wax to alox based tumble lubes was extremely popular before it was discontinued and people used JPL because it contained carnuba wax. Instead of cooking off most of the JPL solvent you can get the same results by adding carnuba flakes at the end then diluting with mineral spirits. My version of 45-45-10 is just carnuba, beeswax, alox and paint thinner and it tumbles well and is not sticky when dried.
    I'm with you. I tumble lube all my pistol bullets and powder coat my rifle bullets. Although I buy my 45-45-10 from white label(I think that is their name). Nice folks.

    ACC

  2. #22
    Boolit Buddy danomano's Avatar
    Join Date
    Aug 2013
    Location
    Oregun
    Posts
    159
    I put a couple drops of Ice Wax in my wet tumbler with the brass. keeps them nice and shinny.

  3. #23
    Boolit Grand Master
    Shiloh's Avatar
    Join Date
    May 2006
    Location
    Republic of Texas
    Posts
    7,103
    There are tried and proven lube recipes here and on the net. Stick with one of those.
    Who knows what the other chemicals are in commercial car wax. I got my carnauba wax. in Ebay.

    Shiloh
    Je suis Charlie

    "A society of sheep must in time beget a government of wolves."
    Bertrand de Jouvenel

    “Any government that does not trust its citizens with firearms is either a tyranny, or planning to become one.” – Joseph P. Martino

    “If you put the federal government in charge of the Sahara Desert , in five years there would be a shortage of sand.” – Milton Friedman

    "Ideas are more powerful than guns. We would not let our enemies have guns; why should we let them have ideas?" - J. Stalin

  4. #24
    Boolit Master
    Join Date
    Jul 2012
    Location
    Canada, Ontario, Durham region
    Posts
    587
    Quote Originally Posted by JonB_in_Glencoe View Post
    Good Cheer,
    while you are filing that tidbit away, be sure to file away the thought that Barrel manufacturers don't polish the inside of their barrels. They leave them in a certain condition, to achieve a certain amount of friction. If a barrel is too polished (or too slippery by other means), accuracy suffers from shot to shot. This is also why I don't use Carnauba wax is a boolit lube.
    I will admit, this doesn't matter with pistols being shot at typical pistol distances.
    Hammer forged barrel rifling makes glass smooth barrel interiors and works in a superior fashion to reduce copper fouling.
    Old fashion cut rifling would cost too much to smooth out to equal a hammer forged barrel.

    The main reason I glean from reading internet post regarding Carnauba wax is that it leaves the bore shinny.
    The quantity of Carnauba added to homemade lube is always reported to be very small.

  5. #25
    Boolit Master


    K43's Avatar
    Join Date
    Aug 2020
    Location
    The Swamp
    Posts
    2,163
    JPW's smell gives me flashbacks to Thursday night field day in the barracks and plus ultra shoe shines the day before a big inspection.

  6. #26
    Boolit Master

    Eddie Southgate's Avatar
    Join Date
    Dec 2016
    Location
    Southern Middle Tennessee/ Hillsboro Alabama
    Posts
    2,169
    Quote Originally Posted by nicholst55 View Post
    On a tangent, has anyone tried Minwax Natural Paste Wax? It's available at the big box stores and online. On the surface, it appears that it would be a good substitute for Johnson's (no longer produced).

    https://www.amazon.com/Minwax-785004...316aa5a9a&th=1
    I know this is an older thread but you asked a question that needs answering. I have read several places that Minwax contained Carnauba just like Johnsons . I did however, call Minwax customer service and found out that Minwax is a mix of paraffin and mineral spirits with no Carnauba. Trewax and Lundmark both have the Carnauba wax.
    Grumpy Old Man With A Gun....... Do Not Touch !!

  7. #27
    Boolit Buddy Kentucky146's Avatar
    Join Date
    Aug 2023
    Posts
    141
    Car Wax I have heard of both positive and neg folks say it works well, others warn of the abrasive side, I have never used it

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check