Can someone who has a cast .357, 9mm, and 40 cal cast bullet that takes a gas check give me the diameter of the bullet that the gas check presses on to?
Thanks so much.
Can someone who has a cast .357, 9mm, and 40 cal cast bullet that takes a gas check give me the diameter of the bullet that the gas check presses on to?
Thanks so much.
I don’t know if this helps but it won’t hurt either
OK, that can help. Thanks. I'm thinking of buying and using an RCBS neck turning attachment and shaving off part of the base for the gas check. As for the bullet, I tap a bullet nose first into the case or press the cast bullet in the case with a die, then attach the case to the hand lathe chuck. Does it sound possible? Does anyone already have an RCBS neck turning attachment to try it?
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |