Can someone who has a cast .357, 9mm, and 40 cal cast bullet that takes a gas check give me the diameter of the bullet that the gas check presses on to?
Thanks so much.
Can someone who has a cast .357, 9mm, and 40 cal cast bullet that takes a gas check give me the diameter of the bullet that the gas check presses on to?
Thanks so much.
I don’t know if this helps but it won’t hurt either![]()
OK, that can help. Thanks. I'm thinking of buying and using an RCBS neck turning attachment and shaving off part of the base for the gas check. As for the bullet, I tap a bullet nose first into the case or press the cast bullet in the case with a die, then attach the case to the hand lathe chuck. Does it sound possible? Does anyone already have an RCBS neck turning attachment to try it?
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |