BulletMatch, a Catalog of Cast Bullets

[Bazoo]

Might keep in mind Missouri Bullet too I've had a few phone calls with them and will be receiving samples of all of their wares.

I'll see if I can dig that one out for you when I get into them again. I've done a few of them so far, but I need to do some tweaks to the site before I do them all.

Thanks, I will keep an eye on them, if they could/would provide a large chunk of LBT's bullets, that would be a great blessing to me.

I received sample of all Missouri Bullet Company's bullets today!

[Bazoo]

I'll verify them and add them individually to the spreadsheet as I enter them on the site.

[No_1]

Bazoo,

I appreciate your hard work. If you don’t mind, I’d like to make this one a sticky.

Rob

[Bazoo]

Bazoo,

I appreciate your hard work. If you don’t mind, I’d like to make this one a sticky.

Rob

Wow! That is one heck of a compliment. It would be an honor, thank you!

[Bazoo]

I have added this bullet, Ranch-Dog TLC324-170-RF that I need a little help with. Does anyone have this mould and can verify that it is marked .324 and not .323?

[Bazoo]

I have added this bullet, Ranch-Dog TLC324-170-RF that I need a little help with. Does anyone have this mould and can verify that it is marked .324 and not .323?

I contacted Ranch Dog and was told that he only made them in .323 diameter and have changed the page accordingly. The bullets in question were sent to me years ago and are from my personal stash, sent to me long before the endeavor for BulletMatch began. I've since lost track of where they came from.

Here is the Ranch Dog TLC323-170-RF.

[janneo64]

Ok, so I've looked through all the posts and haven't found the bullet I have.
It's a 250grains round nose flatpoint with 2 cavity.
See pictures.
This is coated.
If you bazoo doesn't have it I'll send you samples !!!

Skickat från min SM-G973F via Tapatalk
Attachment 329861Attachment 329862Attachment 329863

[Bazoo]

Ok, so I've looked through all the posts and haven't found the bullet I have.
It's a 250grains round nose flatpoint with 2 cavity.
See pictures.
This is coated.
If you bazoo doesn't have it I'll send you samples !!!

Skickat från min SM-G973F via Tapatalk
Attachment 329861Attachment 329862Attachment 329863

Howdy and welcome to the forum.

Thank you very much for the offer.

Your pictures aren't working for some reason.

[janneo64]

Howdy and welcome to the forum.

Thank you very much for the offer.

Your pictures aren't working for some reason.

Do they work now ?

Skickat från min SM-G973F via Tapatalk

[Bazoo]

Do they work now ?

Skickat från min SM-G973F via Tapatalk

They are working now.

It's a nice looking bullet.

Who makes the bullet?

Do you cast and coat them?

[janneo64]

They are working now.

It's a nice looking bullet.

Who makes the bullet?

Do you cast and coat them?

I do the casting and coating !!!

Skickat från min SM-G973F via Tapatalk

[janneo64]

I do the casting and coating !!!

Skickat från min SM-G973F via Tapatalk

I'm sorry bazoo, I can't send you samples.
Trouble with export out of Norway.
I need a license if I send bullets by mail !!!

But the mold is a Lyman.

Skickat från min SM-G973F via Tapatalk

[Bazoo]

I'm sorry bazoo, I can't send you samples.
Trouble with export out of Norway.
I need a license if I send bullets by mail !!!

But the mold is a Lyman.

Skickat från min SM-G973F via Tapatalk

I appreciate the thought and thank you for your effort.

What model is it?