All of mine are full length sizers. They do produce a straight case but can be slow and a pain to use. I use an arbor press. Some of mine show signs of hammer marks. A friend uses a vise to seat the case.
Thanks these came with other goods at an estate auction. Wilson has the Reputation of producing tools for the precision shooters. I can see this would be a slow way to reload. Did it make an appreciable difference ?
I would expect something like that to be used by the bench rest community. Most of the ones I have seen have been FL like the ones Lyman used to make, but the BR guys prefer to neck size only with brass that is already formed to the chamber. You may also see these being used with a little arbor press, another popular tool with the guys who shoot off bags.
Froggie
"It aint easy being green!"
Wilson, Redding and Warner would make dies to your fired cases send them 3-5 fired cases and they would make the die to match them.
This was more popular back in the 50s and 60s when wildcating was more popular.
Used in an arbor press and with care they load very straight concentric ammo.
if the thickness of the brass is not homogeneous, especially on the neck, and this is achieved by reaming the inside and turning the outside, if and when possible, they are not decisive, but only slow_
without going into details, they are only a part, at best, of what is needed to obtain accurate ammo.
for more answers : Handloading for Competition, by Glen Zediker_
Food is overrated. A nice rifle is way more important.
Rob
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |