I am making a special base for a peculiar application and would like to know how to calculate the angle of the base to achieve the various MOAs. I am assuming there is a formula that will allow me to set my milling device at "X" degrees and mill off the bottom of the base to achieve what I need.
I have Googled this and since math is not my strong suit, I'm more confused than ever. I am hoping someone has a simple, understandable method to figure this out.
Before anyone tells me there are hundreds of bases and such, out there, yeah, I know, and would gladly not go through the rigamarole of custom making one, but there is nothing that will work in this instance. As I said, it is an unusual, oddball, situation.