It's been a very long time since I've seen one and I have never used one. I prefer a floating reamer holder verse the Dem-Bart Micro-head which is nothing more than a micro-stop for controlling depth. It would be cool as a man cave display item but not so much for actual usage.
2nd Amendment of the U.S. Constitution. - "A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed."
"Before you argue with someone, ask yourself, is that person even mentally mature enough to grasp the concept of different perspectives? Because if not, there’s absolutely no point."
– Amber Veal
"The Highest form of ignorance is when you reject something you don't know anything about".
- Wayne Dyer
Could you put the dembart in the floating holder ? I've seen the akley used that way
Sent from my Pixel 6a using Tapatalk
No reason it could not be. At the time these were designed DRO's weren't common, if they were available at all. Some lathes had travel dials but again not common for gunsmith type lathes.
The point is technology improves. If you are going to be threading and chamber many barrels thru the spindle with high pressure flush system is the way to go. I also do all my chambering using the tool post on the carriage with a DRO. Holding chamber depth to a couple of tenths is not a problem for me.
If you are planning on doing 50 Cal BMG or some of the large cartridges for ELR competition you need at least 1 9/16" spindle hole
Last edited by M-Tecs; 05-06-2024 at 12:53 AM.
2nd Amendment of the U.S. Constitution. - "A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed."
"Before you argue with someone, ask yourself, is that person even mentally mature enough to grasp the concept of different perspectives? Because if not, there’s absolutely no point."
– Amber Veal
"The Highest form of ignorance is when you reject something you don't know anything about".
- Wayne Dyer
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |