Finally got my new mold out and casting.
Accurate Molds 31-117A - It’s Tom’s clone of the 311316 Lyman whereas I had him eliminate the lube rings as I will powder coat them. This mold dropped with my alloy at .315 - .316 and 119gr. I’ll size after PC to .314.
My alloy; I added a tad bit of solder to help with fillout/flow.
SN 2.16%
SB 2.54%
CU .04%
AG .01%
PB 95.2%
I have not loaded any rounds as of yet. They will be used in a S&W 1905 (1911 date) 32-20 w/ 4” bbl 3rd Change.