[SIZE=4][B]Selling Hi Quality Powdercoating Powder
I carry a Nuke50 because cleaning up the mess is Silly !!
http://www.bing.com/search?q=nuke50&...7ADE&FORM=QBLH
I am not crazy my mom had me tested
Theres a fine line between genius and crazy .. I'm that line
and depending on the day I might just step over that line !!!
No clear coats, I accidentally discovered that if I overcook them then the powder tends to run off some leaving a glass/gloss like coating that is really slick. One day, I dropped one onto the bottom of my oven and just didn't bother with it for about 3-4 consecutive cycles. A few days later I picked it up and was pleasantly surprised by how glossy and smooth it was...unlike my normal baked bullets. I thought about buying clear coats, but some of these colors just makes it easier to find my lead.
I always use the extra step of "shake and clean" bullets with acetone. Take less than a minute. The secret is to make sure you don't use to much acetone in the plastic jar so it can evaporate fast. I have a procedure in place that allow the cleaned bullets to dry of acetone for almost 30 minutes. Clean bullets always powder coat very very well.
I try not to handle bullets any more than necessary with my bare fingers, have occasionally used a nitrile glove. I use the 'shake and bake' method, and and have not needed to clean bullets prior to coating. I do pc as soon after casting as possible.
YMMV hc18flyer
The thing was that I was doing multi tone coating and was wanting to clean the bullets before the next color then that happened. I now just use soap and water or blue painter's masking tape.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |