Bumping because I have an unused can of Rex 0 that I want to load.
Primary wanting to use with 45 ACP 200gr LSWC.
And, if it is close to BE or TG in burn rate maybe some 9mm 125gr LRN plinking loads.
TIA
Sent from my SM-G930P using Tapatalk
Bumping because I have an unused can of Rex 0 that I want to load.
Primary wanting to use with 45 ACP 200gr LSWC.
And, if it is close to BE or TG in burn rate maybe some 9mm 125gr LRN plinking loads.
TIA
Sent from my SM-G930P using Tapatalk
Thanks for all the Rex 3 powder pistol information. I have the booklet from Grafs but there isn't much in it.
Just on the off chance. Does anyone have Rex 1 data for 9mm? Burn rate indicates it to be Red Dot ish.
I may try 2.5 grains with a 124 and work up from there. But if anyone has some data it would save me some time (as well as bullets and primers) and I'd appreciate it.
Sent from my SM-S901U using Tapatalk
Rex 1 45 Auto. 5" barrel. 230 RN Poly coated
3.4gr 642 fps
3.7gr 690 fps
Sent from my SM-S901U using Tapatalk
4.2 grains yields 786 fps with the 230. No signs of pressure, etc. I'm probably safe at 4.5. I'll try that next.
Sent from my SM-S901U using Tapatalk
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |