Have found that using single stage presses in a row with a couple extra shell holders allows me to resize, move my case to a cheap zinc cast light duty Lee press to flair the case mouth and then charge the case. At this point I can set my cast boolit into the charged case and moveAttachment 324647 it into the third Lee light duty press to seat and lightly crimp the finished reload. I can knock out two rounds per minute just pokin along. Although I have 4 Dillons, a Hornady progressive, and 3 C&H progressives it's a pain to change calibers just to make up a 100 rounds or so. Each single stage press has a die and shell holder for that particular caliber. This eliminates screwing dies in and out. Just loaded up about 80 rounds of 38-55wcf to take and burn up at the range. The Lee light duty single stage presses are inexpensive. I do use an RCBS Rock Chucker to do the initial resize. Besides the two extra presses you need two extra shell holders.