I’ve recently bought a tube fed lever gun for which I want to start casting. It’s 357/38spl. I’ve cast for other calibers so I’m good with the process, but not sure about the lead. Most commercial stuff is advertised as hard cast, but not really specific on what qualifies as hard cast. I use straight ww lead for 9mm, 45acp and 300bo. I don’t know if I need to harden it up and try making an alloy or if it’s going to be fine and I’m worried about nothing. I sure don’t want problems with mashing lead in the tube. Anyway, if you have any advice or insight, I’d appreciate you sharing your experiences and wisdom. TIA