RotoMetals2Reloading EverythingTitan ReloadingRepackbox
MidSouth Shooters SupplyLee PrecisionInline FabricationMCD Products

Page 1 of 2 12 LastLast
Results 1 to 20 of 37

Thread: 12ga vs. 20ga recoil--why the difference?

  1. #1
    Boolit Master John in WI's Avatar
    Join Date
    Jan 2012
    Location
    Eastern WI
    Posts
    599

    12ga vs. 20ga recoil--why the difference?

    I'm curious why a 20ga is reported to have lower recoil than a 12ga. In some of the forums, it seems that even a 20 and 12 of the same model place the 20ga having up to 40% less recoil.

    This has always seemed strange to me--I thought the recoil was just the result of an "equal and opposite reaction". If I'm firing say, a 1ounce load of shot, out to lets say 1100fps, they should really produce exactly the same recoil (probably more for the 20ga, because it would probably be lighter).

    Can anyone clear that debate up? It just doesn't make a lot of intuitive sense why there should be a difference--same weight projectile fired at the same velocity, should produce the same recoil (all other things equal--weight of the weapon...)
    Too much of a good thing is an awesome thing!

  2. #2
    Moderator


    Join Date
    Apr 2014
    Location
    Way up in the Cascades
    Posts
    8,568
    I'm afraid that I'm not a deeply scientific person, and maybe you need one to answer this question. First, though, have you ever actually fired both a 12 Ga. and a 20 Ga. from the same model shotgun--let's say a Remington 870? There is a marked difference. There was something in Physics class about an action getting an equal reaction, and the 12 Ga. is larger, containing more powder, larger wad--and even if the shot load is the same, like 1 oz., there's more going out the front and recoiling to the rear. Anyway, that's what my shoulder tells me......

    DG

  3. #3
    Boolit Master Hannibal's Avatar
    Join Date
    Sep 2013
    Location
    East of KCMO
    Posts
    2,306
    I've an H&R Topper in 20 gauge full choke that will flat light you up with #6 shot high brass.

    Plastic butt plate and *might* weigh 6lbs.

  4. #4
    Boolit Grand Master
    Mk42gunner's Avatar
    Join Date
    Aug 2005
    Location
    Butler, MO
    Posts
    9,314
    My wag is that the reason for less recoil in 20 gauge is that there is usually less powder, and maybe slower burning powder at that.

    It is kind of difficult to directly compare 12 and 20 guage guns, because the 20 often has a smaller frame even though the model name may be exactly the same. Unless we are talking the cheaper single shots of yesterday.

    Robert

  5. #5
    Moderator Emeritus
    garandsrus's Avatar
    Join Date
    Jan 2006
    Location
    Warren, MI
    Posts
    2,953
    A 12 ga certainly recoils more than a 20 ga. The biggest reason is that a 20ga target load is 7/8 oz of shot while a 12ga is 1 1/8oz. That’s 28% more shot in the 12ga. The velocity of both is about the same so more powder is needed in the 12ga. A typical powder weight in 20ga is 14gr. 12ga is about 20. That’s about 40% more powder.

    The combination of more shot and more powder gives more recoil. The max 20ga load is about 1 3/8oz while the max 12ga load is close to 2oz of shot. Quite a difference. 2oz 12ga turkey loads are not fun to shoot! There is a huge difference when shooting slugs also.

    If both shotguns were the same weight and used the same shot charge weight at the same velocity, the recoil would be the same.

  6. #6
    Boolit Master
    Join Date
    Jul 2022
    Location
    Godzone country ,New Zealand
    Posts
    532
    nope..given same payload same gun weight and same velocity the 20ga will recoil MORE....TIGHTER BARREL =more pressure..wont be much in it.
    but reason 20ga often said to be lesser recoil is the lesser payload
    biggest mistake MANY Dads have made is buying a light single barrel 20ga for jnr to shoot then feeding it 3" magnum shells throwing a 12ga payload of over an ounce.... same gun with less than oz in 2 3/4' shell at moderate velocity is a whole different ballgame.
    its the reason I laugh when folks say a 28ga is better than .410 when both chuck 3/4oz at same velocity.... the end result is the same on both ends.... 28ga could have slightly less recoil for reason given above and COULD pattern better as less stress on shot through slightly bigger hole on barrel..but nothing in it in either case if you do homework on pattern board.


    lol said same as above poster before reading his post...doah.

  7. #7
    Boolit Master John in WI's Avatar
    Join Date
    Jan 2012
    Location
    Eastern WI
    Posts
    599
    I think that was my question--I realize 20ga loads can really be light (I have some reloading data for 5/8 ounce loads--not tried them, but I assume they are very light on the shoulder). But I was talking specifically about firing the same projectile weight to the same velocity. An ounce at 1100fps is an ounce at 1100fps, regardless of the diameter of the projectile.

    I haven't taken my break actions out (I have a 20 and 12 that are similar--imports with toy-like black plastic stocks) to test and see what difference is. I think I'm wondering if they ACTUALLY have noticably different recoil. Or if I got the 20ga because I read it was lighter recoil, and because I believe it has lighter recoil, I actually perceive less.
    Too much of a good thing is an awesome thing!

  8. #8
    Boolit Grand Master
    Join Date
    Oct 2009
    Location
    Northern Michigan
    Posts
    9,298
    Recoil is not caused by pressure...that is a common misconception.

    These are the factors that affect recoil:
    Weight of shot and wad...mostly shot as wads are very light anyway.
    Velocity of the load...higher velocity will increase velocity
    Amount of powder....more powder adds to ejecta (like the shot and wad beign ejected)...but it is a minor contributor
    And lastly weight of the gun.

    There will be no discernable difference in a 1 oz load at 1200 fps out of a 12 ga or 20 ga gun of the same weight.

    If you want to play around with numbers:

    https://gunpros.com/recoil-calculator-charts/
    Don Verna


  9. #9
    Boolit Buddy
    Join Date
    Nov 2013
    Posts
    115
    Quote Originally Posted by dverna View Post
    Recoil is not caused by pressure...that is a common misconception.

    These are the factors that affect recoil:
    Weight of shot and wad...mostly shot as wads are very light anyway.
    Velocity of the load...higher velocity will increase velocity
    Amount of powder....more powder adds to ejecta (like the shot and wad beign ejected)...but it is a minor contributor
    And lastly weight of the gun.

    There will be no discernable difference in a 1 oz load at 1200 fps out of a 12 ga or 20 ga gun of the same weight.

    If you want to play around with numbers:

    https://gunpros.com/recoil-calculator-charts/
    Try shooting a 3/4oz load from my 3lb 7 oz 410 and you will realize the weight of the gun has a lot to do with recoil.

  10. #10
    Boolit Master Half Dog's Avatar
    Join Date
    Apr 2015
    Location
    Grand Prairie, TX
    Posts
    1,275
    I have successful loads for my 12 gauge using 1, 7/8, & 3/4 oz loads. I currently shoot 7/8 oz loads using 15 grains of powder and I haven’t had any need to complain about recoil. The 3/4 oz loads get pushed a little faster but I don’t see an issue with recoil there too.
    The sooner I fall behind...the more time I have to catch up with

  11. #11
    Boolit Master


    kungfustyle's Avatar
    Join Date
    Feb 2013
    Location
    Knoxville, TN
    Posts
    1,281
    It's the weight. A 12 gauge weighs more than a 20 gauge. For every pound you take off about 25% of recoil. I still think a 20 kicks but not as bad as a 16 gauge. Lighter and faster gun shooting a smaller charge = the same recoil as a heaver gun shooting a stouter charge. Shoot a 7/8 oz load at 1500 fps out of a 20 and a 1 1/8 oz load at the same speed out of a 12 and both sting. Reduce it down to 1200 fps and you will see both are manageable. Shoot a 1oz shot load at 1200 fps out of a 12 and its like a kitten.

  12. #12
    Boolit Master

    Join Date
    Mar 2010
    Location
    NC Arkansas
    Posts
    1,504
    Quote Originally Posted by dverna View Post
    Recoil is not caused by pressure...that is a common misconception.

    These are the factors that affect recoil:
    Weight of shot and wad...mostly shot as wads are very light anyway.
    Velocity of the load...higher velocity will increase velocity
    Amount of powder....more powder adds to ejecta (like the shot and wad beign ejected)...but it is a minor contributor
    And lastly weight of the gun.

    There will be no discernable difference in a 1 oz load at 1200 fps out of a 12 ga or 20 ga gun of the same weight.

    If you want to play around with numbers:

    https://gunpros.com/recoil-calculator-charts/
    Physics says this is the correct answer.

    Besk, the enlarged section covers your statement.
    Spell check doesn't work in Chrome, so if something is spelled wrong, it's just a typo that I missed.

  13. #13
    Boolit Master
    Join Date
    May 2013
    Location
    Eastern WY
    Posts
    2,024
    dverna has it right, gun weight can be a consideration and MOST 20 ga shotshells are loaded with less shot than MOST 12 ga. A light twenty can actually kick harder than a heavy twelve depending on shell selection.

  14. #14
    Boolit Grand Master
    dtknowles's Avatar
    Join Date
    Jan 2010
    Location
    Southeast Louisiana
    Posts
    5,075
    Lighter gun kicks harder, heavier load kicks harder, gauge is less important than the weight of the gun and the power of the load.
    Tim
    Words are weapons sharper than knives - INXS

    The pen is mightier than the sword - Edward Bulwer-Lytton

    The tongue is mightier than the blade - Euripides

  15. #15
    Boolit Master
    Join Date
    Jul 2022
    Location
    Godzone country ,New Zealand
    Posts
    532
    Quote Originally Posted by besk View Post
    Try shooting a 3/4oz load from my 3lb 7 oz 410 and you will realize the weight of the gun has a lot to do with recoil.
    thats what I was getting at about Dads buying a light 20ga for jnr and feeding it magnum shells...

  16. #16
    Boolit Master
    Join Date
    Dec 2013
    Location
    St.Germain, WI
    Posts
    727
    I shoot 7/8 oz. out of both a 12 and 20 gage semi-auto. Would be hard pressed to find a difference in their recoil.
    The only amendment the Democrats support is the 5th.

  17. #17
    Boolit Master
    Join Date
    Nov 2011
    Location
    Indian trail NC
    Posts
    835
    think the shape of the stock also effects recoil

  18. #18
    Boolit Master


    Join Date
    Jul 2005
    Location
    Upstate NY
    Posts
    1,638
    The answer is a bona fide maybe. Or as they say, you are certainly entitled to your own opinion, you are NOT entitled to your own facts.

    Recoil certainly is a product of what is going out vs. what is getting shovedback. Alter one or both one way or another, you will alter recoil. So, it is entirely possible for a 12 gauge to kick more than a 20 gauge. But things can be altered so the opposite is true. Shoot a 3/4 oz light target load at 1050 fps out of an 8 lb. 12 gauge. Shoot a full 1 oz field load at 1290 fps out of a 6 lb 20 gauge, and then talk to me about the respective recoil!

  19. #19
    Boolit Master

    Electrod47's Avatar
    Join Date
    Apr 2016
    Location
    Mississippi
    Posts
    733
    Shotgun gauges weren't created to differentiate recoil. Each was designed for the particular game to be hunted and the terrain and distance to be engaged. If comfort is the goal.....Well, what can anybody say.
    “You should tell someone what you know. There should be a history, so that men can learn from it.

    He smiled. “Men do not learn from history. Each generation believes itself brighter than the last, each believes it can survive the mistakes of the older ones. Each discovers each old thing and they throw up their hands and say ‘See! Look what I have found! Look upon what I know!’ And each believes it is something new.

    Louis L’Amour

    The Californios

  20. #20
    Boolit Master

    Join Date
    Mar 2010
    Location
    NC Arkansas
    Posts
    1,504
    The shape of the stock will not affect the recoil, but it can greatly affect the PERCIEVED recoil. A badly shaped stock will affect the muzzle rise and can cause the comb to hit the cheek harder so that the same amount of recoil will feel greater. Also, the resistance provided provided by the shooter's weight and stance can affect the perceived recoil.
    Spell check doesn't work in Chrome, so if something is spelled wrong, it's just a typo that I missed.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check