Well dakota dj and Gillie Dog welcome to the Lee Automator family! I have to say that I love the fact that this thread continues on supported by the efforts of re-loaders like you guys!
I continue to enjoy my 2 Automators and promote them here and on my FB page Lee Reloading and Casting Equipment. If you are on Fb, please join this page. We have over 11,000 members who are interested in Lee Reloading equipment! It's a good group.
When you get your Automators set and running be sure to come back and post the pics here! Lets keep the show rolling.
My hero's have always been Cowboys!
Well 44Vaquero since you are the official Lee Automator Guru I thought I'd give you a heads up rumor on the Automator's status. As you know Dakota DJ bought one on January 6. Since his purchase the Lee Closeout page now shows "Quantitycoming soon" for the automator
regards,
I forgot to say good job 44Vaquero.
regards,
You know Mike,
If Lee makes a new run of Automators because of this thread, I really would like to see this thread become a "Sticky"!
And thanks for the kind words!
My hero's have always been Cowboys!
I bought one too. Grafted it to a Lee Classic Turret press base. Much more leverage and a whole lot less shaky. It's a stout Pro 1000 now. I had to buy a 50 BMG shell holder to adapt the carrier to the LCT's ram and turn it down to .700 to accept the Pro 1000 carrier. She's running 100% and mounted on a board to fit my Lee quick change press mount. Now all I have to do to it is come up with an elegant and reliable way to drop the completed rounds into a catch bin. The whole unit sits much lower on the LCT base and for now ejcts them into a little corral on the bench top.
I know I am resurrecting a thread that hasn't been used in a while, but....I am a newcomer to the "Automator Club". I happened to be on an auction site a couple weeks ago and saw this one item - a "Lee Automator". I checked around a little and found out what it was. I thought...at auction prices...why not take a chance. Well...I won the auction ($12.50 - yeah baby), and it came in the mail today.
It came in the original box. But, does not have a manual. It also does not have the straight part that shows to the left on the box. I assume this is the indexing rod. Is this correct? I have a Lee 3-hole Turret Press, so I am somewhat familiar with some of the setup/parts.
It will be a while until I can get this set up. I need to find another press to mount it on first. But I do have two questions if anyone can help. I have tried calling Lee, but have not been able to get through yet.
1.) Does anyone have the manual that they could post here?
2.) Does anyone know where I can get the indexing rod? I assume that it needs to be a 3-hole rod, and I don't see one in the parts section on Lee's site. (I could steal the one from my turret press, but don't want to if I don't have to.)
BTW - It looks like Lee may have sold out of the Automators that they had left. I can't find them anywhere on the site now.
I may be answering my own questions...but maybe someone could verify this for me. After thinking about it, I thought that the part that shows on the box may well be the rod that is used by the Pro-1000 (link listed below). Is this correct?
http://leeprecision.com/Action-Rod-Pro1000.html
I am actually wondering if this part is interchangeable with the 3-hold turret press part (although Lee does not say so).
I did get hold of Lee customer support after another try. She told me that they no longer sell the indexing rod for the 3-hole press. She was going to see if they had any extra manuals laying around for the Automator, and will mail me one if she can find it. Or she will make a copy of the one she has and send it to me. If I get it, and someone else hasn't done it by then, I will try to post a link for the manual.
DavidA2:
The op rod from the Pro-1000 will work, it may need to be shortened from the top? When contacting Lee about such things try to contact Laine she is the only service person that is aware the older/discontinued equipment.
I have the manual, PM me your e-mail address and I will scan you a copy! Welcome to the Automator Club!
My hero's have always been Cowboys!
The Automator was made to interchange basically all of its parts with the Pro-1000. Same turrets, same op rod, same shell plate and carrier, same small parts. Basically the idea was to sell you a Pro-1000 and then the Automator for the other size of primers. I got the Automator first when Lee had them on closeout recently, then bought a member's two Pro-1000's and spare parts so I could run the Automator.
"It is wrong always, everywhere, and for everyone to believe anything on insufficient evidence."
-W. K. Clifford "The Ethics of Belief"
"They hate you if you're clever, and they despise a fool."
-John Lennon "A Working Class Hero"
I just got word from Lee that they will not help sort parts to upgrade these to the 2023 Pro 1000. They will however help you with a trade in program to whatever press you want at 50% discount.
These men and their hypnotized followers call this a new order. It is not new. It is not order.
I'll be working on a Lee parts list, that is needed to turn these old presses into a 2023 Pro 1000 ready press.
Stay tuned.
Last edited by deces; 03-02-2024 at 07:52 PM.
These men and their hypnotized followers call this a new order. It is not new. It is not order.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |