I have a 45-70 mold that casts a 247gr boolit that is tapered. It's .456 at the base and .450 at the top and are .620 tall.
Can anybody explain why it would be tapered?
I have a 45-70 mold that casts a 247gr boolit that is tapered. It's .456 at the base and .450 at the top and are .620 tall.
Can anybody explain why it would be tapered?
I have two of Lymans 'tapered' boolits for 40/65 and 45/70. It allows you to seat the boolit into the rifles throat to align everything before firing. Seated as shown you can load 77gns of FFG in the 45/70 and 70gns of FFG in the 40/65.
Hold Still Varmint; while I plugs Yer!
^^^^^^^^^^^^^^^^^
What he said!
If you are going to make a hole in something. MAKE IT A BIG ONE!
When I got this mold I thought I would use it for squib loads in my .458WM, but after casting some and finding them a little undersized and tapered, I wasn't sure if they would be useful. Then I thought I could beagle the mold and bring the base up to a .459, but the top being only .453 would still be a problem.
The taper on this short boolit has me stumped, and disappointed.
My guess is that it is a boolit for one of the British revolver cartridges.
Wayne the Shrink
There is no 'right' that requires me to work for you or you to work for me!
The solid soft lead bullet is undoubtably the best and most satisfactory expanding bullet that has ever been designed. It invariably mushrooms perfectly, and never breaks up. With the metal base that is essential for velocities of 2000 f.s. and upwards to protect the naked base, these metal-based soft lead bullets are splendid.
John Taylor - "African Rifles and Cartridges"
Forget everything you know about loading jacketed bullets. This is a whole new ball game!
Maybe a muzzle loader bullet
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |