I know some of the learned members here have done a range of rimmed conversions on ex-mil actions. I was considering getting a 444marlin done on a P14 I have. I know SMLE and others would be easier, but Im chasing the high action strength advantages of the P14. Im not a gunsmith myself so would get one to do the work. Main question is how much work is involved? If its a reasonably easy conversion I will engage one, but if its going to be 30-40 hours work I wont bother pursuing. Thanks if answers could be around the 444 marlin, not a 45-70, I have a lot of 429 projectiles I intend to use. Also if another exmil action is similar strength and lends itself better to the 444, please suggest