https://leeprecision.com/bl-bullet-sizer-kit
Looks like this is what you need.
quando omni flunkus moritati
Sizing dies for a "normal press".
https://leeprecision.com/search?q=bullet+sizing+die
jmo,
.
Size/Prime a few cases when starting off with a progressive and put them aside. You can plug them back into the process when a bad/odd case screws up in the priming station and continue loading.
Just checked, won't work.
I'm sizing bullets with a Lee hand press.
NOE sells size bushings and the die kit for his bushings.
~~~~~~~~~~~~~~
“If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun.”
― The Dalai Lama, Seattle Times, May 2001
Ok thanks. Guess it wouldnt make sense for lee to make a housing for these bushings that fit in a normal press and still make the other style push through sizers at the same time. Then again RCBS is making a rock chucker and a rebel at the same time so go figure that out.
The sizer (big round part with the hole in it) barely slides into the threaded area of a "normal" press, not enough area to make a holder for it.
The big Classic press that Lee makes that takes the .50 BMG dies would probably work, but don't know if they make the parts, never checked.
Lee sells a bushing conversion for the Rock Chucker for their breech lock items, the only drawback is that they made it out of plastic, works fine just wonder for how long.
"People in Arizona carry guns," said Detective David Ramer, a Chandler police spokesman. You better be careful about who you are picking on...
If one has a lathe, one could turn a new die along with a new ram extension to make it work. But unfortunately there isn't a solution for making the Lee bushing work unless you have a Lee press with the collet lock on it. NOE does make a die kit I think for his bushings, which are cheaper than the Lees. But the initial cost is a little more, and it is incompatible with the Lee bushings.
JDGabbard's Feedback Thread
Jdgabbard's very own boolit boxes pattern!
GOA and FPC have done more in the last decade than your NRA has done in it's entire existence... Support the ones that actually do something for you.
Size/Prime a few cases when starting off with a progressive and put them aside. You can plug them back into the process when a bad/odd case screws up in the priming station and continue loading.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |