I’m trying to find a source for any section views or blue prints for a 1892 winchester
I’m trying to find a source for any section views or blue prints for a 1892 winchester
https://www.gunpartscorp.com/gun-man...les-win/1892-2
Sent from my Pixel 5 using Tapatalk
No need for an exploded view, need a flat section view to make one!
Cool. I'll take mine in 41 magnum!
^^^^This.
RP
Monte Walsh "You have No idea how little I care".
I have the original Winchester 1892 Manual if you are interested. Can't seem to be able to attach it perhaps DM?
Found one, thanks for the thoughts
Might check with Steve @ https://stevesgunz.com/ . He had some unfinished 92 frames.
If you find a source for blueprints, please post the site.
2nd Amendment of the U.S. Constitution. - "A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed."
"Before you argue with someone, ask yourself, is that person even mentally mature enough to grasp the concept of different perspectives? Because if not, there’s absolutely no point."
– Amber Veal
"The Highest form of ignorance is when you reject something you don't know anything about".
- Wayne Dyer
Don’t know if that reply was to me, but I usually start from bar stock, if you access the archives you can see some of my past builds, hi walls and hepburns
I think I remember one of the hepburn threads, but it's been a few years now.
I'm excited to follow the 92 build!
Bill - just a general comment re the time involved in that conversion - I would do it again for the learning experience and the challenge - I am a backyard bush machinist with rudimentary equipment - I know the 92 winchester pretty good - they are a complex piece of machinery - getting one to feed sweet and slick is no easy job - is why I suggested a working model to copy from - I have searched in vain for blueprints - no doubt they out there someplace .
I dont have the equipment nor the expertise to scratch build a 92 frame - have done some of the internal parts.
If I was to embark on a project of that scale it would be a 76 winchester. I reckon much easier to do and three times the value when you got it done. or a sharps or roller - more so again.
I'm sure a detailed blow by blow of your build would be well received by many here - me included. Good luck with it.
What caliber are you thinking to build it in?
My custom build started as a 32WCF and the action was opened up, trued, color case hardened, full length magazine and 44 barrel liner. Now a 44 Special that holds 14 rounds!
![]()
Hold Still Varmint; while I plugs Yer!
Gunsmith costs were $1200 and rifle (1912 manufacture) was provided.
These pair (consequetive Ser No.s 4 digit) were made in 1892 and in 38/40. My collection of '92's is nine in all chamberings.
![]()
Last edited by Bad Ass Wallace; 01-06-2024 at 11:30 PM.
Hold Still Varmint; while I plugs Yer!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |